User manual HP PROLIANT DL380 G4 PACKAGED CLUSTER WITH MSA1000 IMPLEMENTING MICROSOFT WINDOWS SERVER 2003 WITH SERVICE PACK 1 ON PROLIANT SERVE

[. . . ] Implementing Microsoft Windows Server 2003 with Service Pack 1 on ProLiant servers integration note, 2nd edition Abstract. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction to Windows Server 2003 and Service Pack 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Supported configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Recommended system configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] All blade enclosures ship with a Foundation Pack which includes the Rapid Deployment Pack CD. The Rapid Deployment Pack CD contains all of the drivers, agents, and support software that the blade needs. Use the Rapid Deployment Pack CD with any deployment method chosen to install software on HP BladeSystem servers. For additional product information and usage instructions for Rapid Deployment Pack, visit www. hp. com/servers/rdp. Details about other deployment options can be found at the following locations: · For ProLiant BL e-Class: http://h18004. www1. hp. com/products/servers/proliant-bl/eclass/deployment. html · For HP BladeSystem p-Class: http://h18004. www1. hp. com/products/servers/proliant-bl/pclass/documentation. html Manual install To perform a manual installation: 1. Select a supported system platform from the server platforms listed in Table 2. Inspect the system to confirm that it conforms to the platform-specific configuration listed in Table 2. If necessary, update the system ROMs as specified in this table. determine if this step is necessary for the server. 3. Use the System Configuration Utility to configure the hardware for your server. If the server has a Smart Array 642, Smart Array 641, Smart Array 5304, Smart Array 5302, Smart Array 531, Smart Array 5i, Smart Array 431, or Integrated Smart Array Controller installed as the boot controller, configure these arrays by accessing the Option ROM Configuration for Arrays utility via the F8 key during boot. Once the configuration is complete, exit the utility to continue the boot process. Note: Alternatively, you may set your array controller as the secondary controller and install the OS to a SCSI controller. Once the OS is installed, configure the array through the Array Configuration Utility (ACU) using the PSP for Microsoft Windows Server 2003 Version 7. 30A 5. Insert the Windows Server 2003 SP1 CD into the CD-ROM drive to begin installation. After Windows Server 2003 SP1 has been installed, install the Simple Network Management Protocol (SNMP), if you want to use the functionality of the ProLiant Management Agents. · Select the Control Panel from the Start menu. · · · · · · · Select Add/Remove Programs. Select Management and Monitoring Tools from the list of components. Click Details. Select Simple Network Management Protocol so that a checkmark is displayed in the checkbox. Install Version 7. 30A (or later) of the ProLiant Support Pack (PSP) for Microsoft Windows Server 2003, which is available at http://h18023. www1. hp. com/support/files/server/us/locate/3376. html. For the PSP to be installed properly, all files must be present in the same directory as the SETUP. EXE program. Primary installation method · · Run the SETUP. EXE program included with the PSP. By default, all software components are selected for installation. [. . . ] The software is not installed on this system, but is supported for installation. - the component will be installed Installation failed on at least one device. One of the devices may have been deleted through Device Manager and a reboot may be necessary to complete the driver installation for this device. Solution This issue is resolved in Version 5. 36. 0. 0 or later of the ProLiant Advanced System Management Controller Driver for Windows 2000/Server 2003. [. . . ]