User manual HP PROLIANT SERVER AND BLADESYSTEM INTEGRATIONS WITH MICROSOFT SYSTEM CENTER

[. . . ] HP BladeSystem Management Pack for Operations Manager 2007 User Guide Part Number 482893-001 February 2008 (First Edition) © Copyright 2008 Hewlett-Packard Development Company, L. P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] A refresh is required to see the latest connection and enclosure monitoring state. A manual refresh or connection to another Monitor Service is needed to re-enable auto refresh and wizards. Adding enclosures To add enclosures: 1. Configure the Onboard Administrator enclosure with login and SNMP settings. The primary and secondary (optional) IP addresses or DNS name of the Onboard Administrator and the login information are required to add enclosures. 2. In the Actions pane, click Add Enclosure, or click the Add icon. The wizard validates the information with the Onboard Administrator before adding an enclosure. The wizard also ensures that the Onboard Administrator meets the minimum supported firmware version. 3. Follow the instructions on the screen until the enclosure is added to Monitor Service. Installation and configuration 17 The Monitoring Service starts monitoring the enclosures immediately after the wizard completes. However, newly added enclosures are not available in the System Center Operations Manager Console until the next discovery cycle completes. Removing managed enclosures To remove one or multiple managed enclosures from the monitor service: 1. Click Remove Managed Enclosure from the Actions pane of the Monitor Manager, or click the Remove icon. The Remove managed enclosure wizard appears. Follow the instructions on the screen until the enclosure has been removed from the monitor service. The changes are reflected after the next discovery cycle. 2. The Monitor Service stops monitoring the removed enclosures immediately after the wizard completes. However, the System Center Operations Manager Console continues to display the removed enclosures and subsystems until these elements are removed after the next discovery cycle. Modifying enclosure login To modify login information on an enclosure: 1. 2. From the Actions pane, click Modify enclosure login, or click the Modify Enclosure Login icon. The Modify enclosure login wizard appears. Follow the instructions on the screen until the login information is updated. If the Apply changes to the Monitor Service immediately checkbox is selected, the modified Monitor Service starts using the updated information immediately after the wizard completes. If the Apply changes to Monitor Service immediately checkbox is not selected, the modified information is not applied until Monitor Service re-connects with HP BladeSystem Onboard Administrator. Changes to the System Center Operations Manager Console are not applied until after the next discovery cycle. Modifying enclosure configuration To modify the login information of an enclosure (including primary address, secondary address, login name, and password): 1. 2. From the Actions pane, click Modify enclosure login, or click the Modify Enclosure Login icon. The Modify enclosure login wizard appears. Follow the instructions on the screen until the login information is updated. If the Apply changes to the Monitor Service immediately checkbox is selected, the modified Monitor Service starts using the updated information immediately after the wizard completes. If the Apply changes to Monitor Service immediately checkbox is not selected, the modified information is not applied until Monitor Service re-connects with HP BladeSystem Onboard Administrator. Changes to the System Center Operations Manager Console are not applied until after the next discovery cycle. Installation and configuration 18 Launching the Onboard Administrator web To launch the web site for the Onboard Administrator, select the managed enclosure from the Tree pane, and click Onboard Administrator Web from the Actions pane or the Onboard Administrator Web icon. Internet Explorer appears with the Onboard Administrator Web link opened. Launching the HP BladeSystem Management Pack help To launch the HP BladeSystem Management Pack help document, click Help from the Actions pane or the Help icon. Installation and configuration 19 Using the software Using the HP BladeSystem Management Pack for Operations Manager 2007 HP BladeSystem Management Pack for Operations Manager 2007 includes the following elements: · · · · · · Classes Views Discoveries Monitors Rules Tasks Before using HP BladeSystem Management Pack for Operations Manager 2007, be sure that HP BladeSystem Management Pack for Operations Manager 2007 has been installed according to the installation procedures defined in this guide. Classes The structure of HP BladeSystem Classes is defined to seamlessly provide operations with HP ProLiant Server Management Packs for Operations Manager 2007. Using the software 20 The HP BladeSystem Management Pack defines the following classes. The following table displays the properties of each class. Class HP BladeSystem Enclosure -- -- -- -- -- -- -- -- -- -- -- -- -- HP BladeSystem Device Bay Collection -- -- Property name Name Model Name Enclosure Serial Number Part Number Spare Part Number Rack Name Asset Tag Manufacturer Number of Device Bays Number of Fan Bays Number of Interconnect Bays Number of OA Bays IP Address Name Number of Present Device Bays Enclosure Serial Number Sample value IT03-ENC-A BladeSystem c7000 Enclosure USE6321FJC 412152-B1 414050-001 IT03-Rack-A IT03-ENC-A-2007 HP 16 10 8 2 192. 168. 21. 76 Device Bays--IT03-ENC-A 5 USE6321FJC Number of Power Supply Bays 6 Using the software 21 Class -- HP BladeSystem Device Bay -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- HP BladeSystem Thermal Subsystem -- -- -- HP BladeSystem Fan -- -- -- -- -- -- -- HP BladeSystem Interconnect Bay Collection -- -- -- HP BladeSystem Interconnect Bay Property name Server Name Name Bay Number Blade Type Manufacturer Product Name Part Number System Board Spare Part Number Serial Number BIOS Server Name BIOS Asset Tag ROM Version Integrated Lights-Out Name Integrated Lights-Out Address Integrated Lights-Out MAC Address Integrated Lights-Out Model Sample value N/A Device Bay 2--ProLiant Server 2 Workstation HP ProLiant BL685c G1 404704-B21 410293-001 USM62500TE BL480c-VS13 Xxxxxxx I14 05/17/2006 ILOUSM62500TE 192. 168. 21. 79 00:16:35:3D:71:BB iLO2 Integrated Lights-Out Firmware 1. 30 Jun 01 2007 Version Name Redundancy Enclosure Serial Number Server Name Name Bay Number Part Number Present Power (Watts) Spare Part Number Serial Number Product Name Fan Speed (% of max) Name Number of Present Interconnect Bays Enclosure Serial Number Server Name Name Thermal Subsystem--IT03-ENC-A Redundant USE6321FJC N/A Fan--Bay1 1 412140-B21 9 413996-001 (empty) BladeSystem c-Class fan 30 Interconnect Bays--IT03-ENC-A 2 USE6321FJC N/A Interconnect Bay--Bay 3 Using the software 22 Class -- -- -- -- -- -- -- -- -- -- HP BladeSystem Onboard Administrator Collection -- -- -- HP BladeSystem Onboard Administrator -- -- -- -- -- -- -- -- -- HP BladeSystem Power Subsystem -- -- -- HP BladeSystem Power Supply -- -- -- -- -- -- Property name Bay Number Type Product Name Management IP Address User Assigned Name Part Number Spare Part Number Serial Number Manufacturer Temperature Sensor Name Number of Present OA Bays Enclosure Serial Number Server Name Name Bay Number Spare Part Number Firmware Version Manufacturer Part Number Role IP Address Serial Number Device Name Name Enclosure Power Mode Enclosure Serial Number Server Name Name Bay Number Present Output (Watts) Output Capacity (Watts) Spare Part Number Serial Number Part Number Sample value 3 Ethernet Brocade 4/12 SAN Switch for HP c-Class BladeSystem 10. 77. 77. 77 Swd77 AE370A 411120-001 CN8632600D BORCADE Present Onboard Administrators ­ IT03-ENC-A 2 USE6321FJC N/A <Active|Standby> Onboard Administrator 1 414055-001 2. 02 HP 407296-001 ACTIVE 192. 168. 21. 68 O96MK0260 BladeSystem c7000 Onboard Administrator Power Subsystem--IT03-ENC-A AC Redundant with Power Ceiling USE6321FJC N/A Power Supply ­ Bay 1 1 405 2250 411099-001 5A22B0AHLTA0AB 412138-B21 Using the software 23 Views The Operations Manager console provides a collection of folders and windows for viewing information stored in the Operations Manager database. [. . . ] This trap signifies that a server blade is requested to low power. Source IP Address: '%1'; Source Name: '%2'; Rack Name: '%4'; Rack Unique ID: '%5'; Server Blade Enclosure Name '%6'; Server Blade Name '%7'; Server Blade Position '%8'; Server Blade Spare Part Number '%9'; Enclosure Serial Number '%10'; Trap Sequence Number '%11' [SNMP TRAP: 22049 in CPQRACK. MIB] <a href="https://%1/">Onboard Administrator Web Console</a> Server blade removed NT Provider: Blade Enclosure NT Event ID: 22050 NT Event Type: Informational NT Event Message: Server Blade Removed. This trap signifies that a server blade has been removed from the enclosure. Source IP Address: '%1'; Source Name: '%2'; Rack Name: '%4'; Rack Unique ID: '%5'; NT Event lists for HP BladeSystem Enclosure Monitor Service 67 Server Blade Enclosure Name '%6'; Server Blade Name '%7'; Server Blade Position '%8'; Server Blade Spare Part Number '%9'; Enclosure Serial Number '%10'; Server Blade Serial Number '%11'; Server Blade Unique ID '%12'; Trap Sequence Number '%13' [SNMP TRAP: 22050 in CPQRACK. MIB] <a href="https://%1/">Onboard Administrator Web Console</a> Server Blade inserted NT Provider: Blade Enclosure NT Event ID: 22051 NT Event Type: Informational NT Event Message: Server Blade Inserted. [. . . ]