Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HP PSC 1310. We hope that this HP PSC 1310 user guide will be useful to you.
Lastmanuals help download the user guide HP PSC 1310.
You may also download the following manuals related to this product:
HP PSC 1310 Quick Start (2079 ko) HP PSC 1310 Reference Guide (2758 ko)
Manual abstract: user guide HP PSC 1310
Detailed instructions for use are in the User's Guide.
[. . . ] a Hold the tri-color print cartridge with the HP label facing up. b Place the tri-color print cartridge in front of the left slot. c Push the cartridge firmly into the slot until it snaps into place.
12
Insert the black print cartridge
a Hold the black print cartridge with the HP label facing up. [. . . ] b Place the black print cartridge in front of the right slot. c Push the cartridge firmly into the slot until it snaps into place. d Close the access door.
4 · HP all-in-one
13
Align the print cartridges
a Press OK at each of the prompts on the control panel to start print cartridge alignment. b After the page prints, alignment is complete. Check the color graphics display for the status, and then press OK. If it fails, see Troubleshooting in the last section. Recycle or discard the alignment page.
If you are not connecting the device to a computer, continue to the User Guide for information on how to get started.
14
Turn on your computer
a Turn on your computer, login if necessary, and then wait for the desktop to appear. (Windows only) You did not see the screen telling you when to connect the USB cable. Remove, and then re-insert the HP all-in-one Windows CD. Refer to Step 15.
Problem:
Action:
Problem:
(Windows only) The Microsoft Add Hardware screen appears.
Action:
Click Cancel. Unplug the USB cable, and then insert the HP all-in-one Windows CD. (Windows only) The Device Setup Has Failed To Complete screen appears. Verify that the control-panel overlay is firmly attached. Make sure the USB cable is plugged into the computer. [. . . ] Make sure the USB cable is plugged into the computer. Do not plug the USB cable into a keyboard or non-powered hub. Refer to Steps 4 and 16.
Problem: Action:
Problem: Action:
(Macintosh only) The Macintosh software does not install. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HP PSC 1310
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HP PSC 1310 will begin.
HP PSC 1310 Quick Start (2079 ko)
