User manual HP PSC 1315XI

[. . . ] Note: Regulatory information can be found in the technical information chapter of this guide. Safety information Warning To prevent fire or shock hazard, do not expose this product to rain or any type of moisture. Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock. Adobe® and the Acrobat Logo® are trademarks Adobe Systems Incorporated. [. . . ] To check the ink levels from the HP Solution Center (Windows) 1. In the HP Solution Center, click Settings, point to Print Settings, and then click Printer Toolbox. The estimated ink levels for the print cartridges appear. To check the ink levels from the HP Image Zone software (Mac) 1. In the HP Image Zone, choose Settings, and then choose Maintain Printer. If the Select Printer dialog box appears, select your HP All-in-One, and then click Utilities. The estimated ink levels for the print cartridges appear. Print a self-test report If you are experiencing problems with printing, print a self-test report before you replace the print cartridges. Load full-sized, unused plain white paper into the paper tray. Press and hold the Cancel button and then press the Start Copy Color button. 3. Make sure the test patterns show a complete grid and that the thick colors lines are complete. ­ If more than a few lines in a pattern are broken, this might indicate a problem with the nozzles. You might need to clean the print cartridges. For more information, see Clean the print cartridges. You can also align the print cartridges at any time from the HP Image Zone software on your computer. Aligning the print cartridges ensures high-quality output. Note If you remove and reinstall the same print cartridge, the HP All-in-One will not align the print cartridges. The HP All-in-One remembers the alignment values for that print cartridge, so you do not need to realign the print cartridges. If you have colored paper loaded in the paper tray when you align the print cartridges, the alignment will fail. Load unused plain white paper into the paper tray, and then try the alignment again. If the alignment fails again, you might have a defective sensor or print cartridge. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. Scan Maintain your HP All-in-One 1. 3. Make sure you have letter or A4 unused plain white paper loaded in the paper tray. The HP All-in-One prints a print cartridge alignment sheet. [. . . ] For more information, go to the following website: www. hp. com/hpinfo/globalcitizenship/environment/recycle/inkjet. html Important recycling information for our customers in the European Union To preserve the environment, this product must be recycled after its useful life as required by law. The symbol below indicates that this product may not be disposed in the general trash. Please return the product for proper recovery/disposal to the authorized collection location nearest to you. For more information regarding return and recycling of HP products generally, please visit: http://www. hp. com/hpinfo/globalcitizenship/environment/recycle/index. html. User Guide 53 Chapter 11 Regulatory notices The HP All-in-One meets product requirements from regulatory agencies in your country/region. [. . . ]