User manual HP PSC 2175 Reference Guide

[. . . ] No part of the document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. This product incorporates Adobe's PDF technology, which contains an implementation of LZW licensed under U. Adobe and the Acrobat logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. The Hewlett-Packard Company shall not be liable for incidental or consequential damages in connection with, or arising out of the furnishing, performance, or use of this document and the program material which it describes. [. . . ] Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner. Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass; these can damage it. Dry the glass with a chamois or cellulose sponge to prevent spotting. Minor debris can accumulate on the white document-backing located underneath the unit's lid. Turn off the unit, unplug the power cord, and raise the lid. Clean the white document-backing with a soft cloth or sponge slightly moistened with a mild soap and warm water. Wash the backing gently to loosen debris; do not scrub the backing. Dry the backing with a chamois or soft cloth. Do not use paper-based wipes as these may scratch the backing. If this does not clean the backing well enough, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual alcohol. Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off the case. The interior of the unit does not require cleaning. Keep fluids away from the interior of the unit as well as the front panel. To ensure the best print quality from your HP PSC, you will need to perform some simple maintenance procedures, and when prompted by a front-panel message, replace the print cartridges. If you are experiencing problems with printing, before cleaning or replacing the print cartridges, you should print a self-test report. This report provides useful information about your print cartridges, including status information and ink levels. Press Setup until Print Report appears, and then press Enter. Press until Self-Test appears, and then press Enter. A self-test report is printed for your HP PSC, which may indicate the source of any problems you may be having. Before you replace or clean a print cartridge, you should know the part names and how to handle the print cartridge. The print cartridge protector is designed to keep your print cartridge secure when it is not being used. Whenever you remove a print cartridge from the printer, store it in the print cartridge protector that came with your printer. [. . . ] If HP is unable to repair or replace, as applicable, a defective Product which is covered by HP's warranty, HP shall, within a reasonable time after being notified of the defect, refund the purchase price for the Product. HP shall have no obligation to repair, replace, or refund until the Customer returns the defective Product to HP. Any replacement product may be either new or like-new, provided that it has functionality at least equal to that of the Product being replaced. HP products, including each Product, may contain remanufactured parts, components, or materials equivalent to new in performance. [. . . ]