User manual HP PSC 2310 Reference Guide

[. . . ] No part of the document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. This product incorporates Adobe's PDF technology, which contains an implementation of LZW licensed under U. Adobe and the Acrobat logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Hewlett-Packard assumes no responsibility for any errors that may appear in this document, nor does it make expressed or implied warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. [. . . ] Scan in photos of your kids and e-mail them to relatives, create a photographic inventory of your house or office, or create an electronic scrapbook. To use the scan features, your HP PSC and computer must be connected and turned on. The HP PSC software must also be installed and running on your computer prior to scanning. To verify that the HP PSC software is running on a Windows PC, look for the hp psc 2300 series icon in the system tray at the lower right side of the screen, next to the time. on a Macintosh , the HP PSC software is always running. You can start a scan from your computer or from your HP PSC. This section explains how to scan from the front panel of the HP PSC. For information about how to scan from the computer, and how to adjust, resize, rotate, crop, and sharpen your scans, see the onscreen hp photo & imaging help that came with your software. This section contains the following topics: · This section contains the following topics: · Follow these steps if your HP PSC is connected to a computer via a USB or parallel cable. 1 2 Load your original face down on the front right corner of the glass. The default destination is whichever one you selected the last time you used this menu. A preview image of the scan appears in the HP Scan window on the computer, where you can edit it. For more information about editing a preview image, see the onscreen hp photo & imaging help that came with your software. Make any needed edits to the preview image in the HP Scan window. The HP Gallery has many tools that you can use to edit your scanned image. When the scanned image looks just the way you want it, you can open it in another application, send it via e-mail, save it to a file, or print it. For more information about using the HP Gallery, see the HP Photo & Imaging Help. Print Most print settings are automatically handled by the software application you are printing from or by HP ColorSmart technology. You only need to change the settings manually when you change print quality, print on specific types of paper or film, or use special features. Note: If you have a photo memory card, you can select and print photos directly from it using the HP PSC. For information, see use a photo memory card on page 21. This section contains the following topics: · For more information on performing special print jobs, see the onscreen HP Photo & Imaging Help that came with your software. [. . . ] Lift open the print-carriage access door to expose the print cartridges and remove any packing material or other items that do not belong there. Connecting your computer to your HP PSC with a USB cable is straightforward. Simply plug one end of the USB cable into the back of your computer and the other into the back of the HP PSC. You can connect to any USB port on the back of your computer. [. . . ]