User manual HP SCANJET 4070

[. . . ] HP Scanjet 4070 Photosmart scanner User`s Manual HP Scanjet 4070 Photosmart scanner User's Manual Legal information Copyright And License © 2004 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] You can change all scan settings from the Settings menu in the HP Director software, including button settings, scanning preferences, and other settings. To change settings, start the HP Director software, and then click Settings. Turn Preview Image on or off Note Macintosh users, see the HP Director software on-screen help for information about turning preview on or off. 1 Double-click the HP Director icon ( ) on your desktop. Or, on the taskbar, click Start, point to Programs or All Programs, point to HP, and then click HP Director. When the HP Director opens, make sure that your HP scanner is selected in the Select Device list. On the Settings menu, point to Scan Settings & Preferences, and then click Button Settings. The Button Settings dialog box, which has a tab for each configurable button, opens. Click the tab that corresponds to the button that you want to set. Select or clear the preview button setting for that button. When you are satisfied with the settings, click OK. 2 3 4 5 6 Care and maintenance Occasional cleaning of your scanner helps ensure optimal performance. The amount of care necessary depends upon several factors, including the amount of use and the environment. You should perform routine cleaning as necessary. Caution Avoid placing items with sharp edges in the scanner. Before placing an item on the scanner glass, make sure the item is free of wet glue, correction fluid, or other substances that can be transferred to the glass. Clean the scanner glass Disconnect the USB cable and power cable from the scanner. Clean the glass using a soft, lint-free cloth sprayed with a mild glass cleaner, drying the glass with a dry, soft, lint-free cloth. Avoid abrasives, acetone, benzene, and carbon tetrachloride, all of which can damage the scanner glass. Avoid isopropyl alcohol because it can leave streaks on the glass. 12 HP Scanjet 4070 Photosmart scanner How to use the scanner Do not spray the glass cleaner directly on the glass. If too much glass cleaner is applied, the cleaner could run to the edges and damage the scanner. When finished, reconnect the USB cable and power cable to the scanner. Note For instructions on how to clean the underside of the scanner glass, visit www. hp. com/support. [. . . ] You will receive a personal reply from an HP Customer Support technician. E-mail support is available in the languages listed at that website. If your scanner has a hardware failure, take it to your local HP dealer for a solution. Service is free during your scanner's limited warranty period. [. . . ]