User manual HP SCANJET 4890

[. . . ] HP Scanjet 4800 series Photo Scanner User's manual HP Scanjet 4800 series User's Manual Copyright and license © 2005 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] Place medium-format or large-format film strips in the large-format template. 12 HP Scanjet 4800 series Note If a light shield is provided, use the negative light shield to cover the remaining area in the in the negative holder if you are scanning fewer than the maximum number of negative frames with the TMA. This ensures that no extra light leaks into the scan. Snap shut any open doors on the template. Place the template on the scanner glass and close the scanner lid. Align the arrow on the template with the corner reference mark on the scanner bed. ) on the scanner, or click Scan Film in HP Press the Scan Film button ( Solution Center. Select Scan negatives using the Transparent Materials Adapter (TMA). If you want to preview the scanned picture, select the Show Preview check box on the screen, or begin the scan from HP Solution Center. Follow the instructions on the screen to finish scanning. The scan is sent to the destination selected in the HP Scanning dialog box. When finished, remove the negatives from the template. Replace the TMA cover, inserting the hooks into the openings in the lid before snapping the cover latch closed at the top. 6. Tips for scanning transparent items To scan items larger than those that the transparent materials adapter (TMA) accepts, place the transparency on the scanner glass, place a white sheet of paper on top of the transparency, and then scan as usual. When scanning a 35 mm slide or negative, the scanner software automatically enlarges the image to approximately 10 cm x 15 cm (4 x 6 inches). If you want the final image to be larger or smaller, use the Resize tool in the scanner software to set the scaling to the final size that you select. The scanner will scan the item to the size that you select and adjust the scan resolution as appropriate. User's Manual 13 Chapter 1 To scan positives, such as 35 mm slides, or negatives by using the TMA, press the Scan Film button ( ) on the top of the scanner, or click Scan Film in HP Solution Center. When cropping images, completely remove the borders to reduce excess light interference. A cropped image from a slide Make copies Use the Copy button ( ) to scan an original and send it to a printer. The front panel Copy button is optimized to scan and print a duplicate of what is on the scanner glass. If you want to change the image, such as lighten, darken, or adjust size, use the Make Copies button in the HP Solution Center. Place the original face down on the scanner glass, as indicated by the reference marks. The copy is printed on the default printer. Note There is no preview image for the copy function. Share a scanned document or picture Use the Scan to Share button ( ) to scan pictures or documents from the scanner glass and send the scans to HP Instant Share, if available, or to a supported e-mail program as an attachment. HP Instant Share is recommended for sharing pictures. E-mail is the recommended option for sharing single-page or multiple-page text documents. [. . . ] Review the onscreen Help for the software and scanner, including the Troubleshooting section. Go to the software section or to the scanner-specific Troubleshooting section. Go to the HP Consumer Support Web site for support. If you have access to the Internet, you can obtain a wide range of information about your scanner. [. . . ]