User manual HP STORAGEWORKS 1/8 TAPE AUTOLOADER STORAGEWORKS 1/8 TAPE AUTOLOADER GETTING STARTED POSTER (AUGUST 2005)

[. . . ] Documentation CD: User and Service Guide with Web links for product registration, drivers, and technical support. This kit is required for mounting the autoloader into a 19 inch rack. Visit www. hp. com/go/support and type the autoloader model name or part number to: · View, download, or print the user manual · Access the HP Library & Tape Tools diagnostic utility · Obtain more information on backup software Front overview 1 Unpacking the autoloader 1. 5. Mailslot Front panel LED's Power switch Front panel LCD display Control keys Rear overview After removing the accessories package, lift the autoloader and padding out of the box and place it on a work surface, top facing up. [. . . ] Attach the SCSI cable, terminator, and power cord as shown. WARNING: This product can ONLY be used with an HP approved power cord for your specific geographic region. Use of a non-HP approved power cord may result in: 1) not meeting individual country specific safety requirements; 2) insufficient conductor ampacity that could result in overheating with potential personal injury and/or property damage; and 3) an unapproved power cord could fracture resulting in the internal contacts being exposed, which potentially could subject the user to a shock hazard. HP disclaims all liability in the event a non-HP approved power cord is used. NOTE: It is important to connect to a SCSI HBA that supports your autoloader's optimum performance. Some models also require an HBA that supports LUN scanning. Please refer to the user manual for detailed recommendations and more information about SCSI IDs. Install a SCSI host bus adapter, software, and compatible driver on the host computer. Install the HP Library & Tape Tools diagnostic utility available at www. hp. com/support/TapeTools to verify installation, upgrade firmware, and to aid in troubleshooting. Loading cartridges Operating the Autoloader Operator's Panel Overview The Operator's Panel has four LEDs, four buttons, and a 2-line by 16-character LCD screen. It provides everything you need to monitor autoloader status and to control all of its functions. Load tapes from the autoloader slots into the drive by using the Load Cartridge command from the front panel. Unloading cartridges Unload tapes from the drive to the autoloader slots using the Unload Cartridge command from the front panel. Cleaning the drive Clean the drive when the Clean Drive LED is illuminated. Use the Clean Drive command from the front panel to import a cleaning cartridge into the autoloader and begin the cleaning operation. Only model specific cleaning cartridges can be used. All other cleaning cartridges will be rejected by the autoloader. The display defaults to the Home screen. The Home screen consists of the autoloader status on the top line and the current cartridge inventory on the second line. If the tape drive does not have a cartridge loaded, the top line displays <Drive type> or Drive empty, depending upon the type of autoloader (as shown). Ordering media To prolong the life of the drive, use HP storage media that is specific to your tape autoloader model. To determine your model and cartridge type, refer to the HP StorageWorks 1/8 Tape Autoloader User and Service Guide found on the Documentation CD that came with your tape autoloader. To learn more about, or to purchase HP media, visit www. hp. com/go/storagemedia If the tape drive has a cartridge loaded, the top line displays Drive ready or Drive loaded, depending upon the type of autoloader (as shown). The cartridge currently loaded in the drive is indicated by an alternating black block and the slot number. [. . . ] La Guida dell'utente e di assistenza del caricatore automatico di nastri HP StorageWorks 1/8 nella lingua richiesta, è disponibile sul sito Web HP all'indirizzo http://www. hp. com/support/storage oppure sul CD della documentazione incluso nel kit degli accessori del caricatore automatico di nastri. Ga naar http://www. hp. com/support/storage om uw taalversie van de gebruikers- en servicehandleiding voor de HP StorageWorks 1/8 Tape Autoloader te downloaden. U vindt deze handleiding ook op de documentatie-cd in de accessoireset bij de tapeautoloader. [. . . ]