User manual HP STORAGEWORKS 1000 MODULAR SMART ARRAY FOR SMALL BUSINESS SAN KIT

[. . . ] User Guide HP StorageWorks 2/8q Fibre Channel Switch Management First Edition (November 2004) Part Number: A7450­96007 This manual describes the management tools for the HP StorageWorks 2/8q Fibre Channel Switch (2/8q FC Switch) that are included with the Modular Smart Array 1000 Small Business SAN. Main sections of this guide include: - Switch Manager User Interface - Command Line Interface © Copyright 2004 Hewlett-Packard Development Company, L. P. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] Number of offline primitives transmitted by the port. Total number of frames received by the port. Total number of words received by the port. Total number of frames transmitted by the port. Total number of words transmitted by the port. Number of link reset primitives sent from this port to an attached port. Total number of offline sequences transmitted and received by the port. LIP (AL_PD, AL_PS) LIP(f7, AL_PS) LIP(f7, f7) LIP(f8, AL_PS) Login Count Logout Count Loop Timeouts Loss Of Sync Primitive Sequence Errors Rx Link Resets Rx Offline Sequences Total Errors Total Link Resets Total LIPs Received Total LIPs Transmitted Tx Offline Sequences Total Rx Frames Total Rx Words Total Tx Frames Total Tx Words Tx Link Resets Total Offline Sequences HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 83 Switch Manager Port Information data window The Port Information data window displays port detail information for the selected port. To open the Port Information data window, click the Port Info tab below the data window in the faceplate display. Table 24 describes the Port Information data window entries. Table 24: Port Information data window entries Entry Port Address Administrative Port Type Operational Port Type Administrative Port State Port Fibre Channel address. The port type (G, GL, F, FL, or Donor) that the port is configured as. This value is persistent; it is maintained during a switch reset. During a port auto-configuration it is used to determine which operational port states are allowed. This is set during port auto-configuration based on the administrative port type. The port state (Online, Offline, Diagnostics, or Down) which has been set by the user. This state may be different from the configured administrative state if the user has not saved it in the switch configuration. This state is used at the time it is set to try to set the port operational state. This value is not persistent and is lost on a switch reset. The port state that is currently active. This value may be different from the administrative port state, for example due to an error condition. The port state (Online, Offline, Diagnostics, or Down) which is saved in the switch configuration, either by the user or at the factory. This value is persistent; it is maintained during a switch reset, and is used after a reset to set the port operational state. Whether RSCN suppression is enabled or disabled. [. . . ] If [zone_set] is the active zone set, the zone will not be removed until the zone set has been deactivated. RENAME [zone_set_old] [zone_set_new] Renames the zone set given by [zone_set_old] to the name given by [zone_set_new]. You can rename the active zone set. ZONES [zone_set] Displays all zones that are components of the zone set given by [zone_set]. This keyword does not require an Admin session. Notes A zone set must be active for its definitions to be applied to the fabric. Only one zone set can be active at one time. [. . . ]