User manual HP STORAGEWORKS 400T ALL-IN-ONE STORAGE SYSTEM

[. . . ] HP StorageWorks All-in-One Storage System user guide Part number: 440583-005 First edition: February 2008 Legal and notice information © Copyright 2006, 2008 Hewlett-Packard Development Company, L. P. Valid license from HP required for possession, use or copying. Consistent with FAR 12. 211 and 12. 212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U. S. Government under vendor's standard commercial license. [. . . ] The file directory is located on the volume created on the iSCSI LUN exported by ASM to the server that hosts Exchange. Application Path All-in-One Storage System 95 Property Protocol Application Server Host Name Application Server Volume Name Application Server Volume Status Application Server Volume Exclusive Storage Application Server Volume - RAID Level Application Server Volume - RAID Stripe Size Application Server Volume - Read Cache Application Server Volume Write Cache Application Server Volume Number of Hot Spares Application Server Volume Mount Paths Value Communication protocol used to transfer data between the server that hosts Exchange (and the storage group component) and your HP All-in-One Storage System. Name of server that hosts Exchange and the storage group component. Name of the volume on the server that hosts Exchange to which Exchange saves the storage group component's data. The volume resides on the iSCSI LUN exported by ASM to the server that hosts Exchange. Status of the volume on the server that hosts Exchange where the storage group component is stored. Indicates if storage group component's storage is configured with exclusive storage. See Table 19 on page 72 for more information. The RAID level to which the storage group component storage is configured. See Customizing RAID levels on page 73 for more information. The RAID stripe size to which the storage group component's storage is configured. See Table 19 on page 72 for more information. This setting is determined by the storage array, not ASM. This setting is determined by the storage array, not ASM. The number of hot spares with which the storage group component storage is configured. See Table 19 on page 72 for more information. Path the volume is mounted on, on the server that hosts Exchange. The volume is built on the iSCSI LUN exported by ASM to the server that hosts Exchange. · Warning Threshold tab--(Exchange storage group components) Allows you to change the Percent Full Warning Threshold value for the storage group component. See Setting a percent full warning threshold on page 74 for more information. · Mail Store, Public Store, or Log tab--(Exchange storage group components) One of these three tabs is available depending on whether the storage group component is a mail store, public store, or log. · Mail Store tab--Displays the status and properties of the mail store reported byt the Exchange server. Table 24 Mail Store tab: Exchange storage group component properties Value Mail Store Name Online Database File Description Name of storage group mail store. The storage group mail store is available for use. [. . . ] The amount of storage that ASM allocates and configures for an application component or shared folder. To change the size of the allocated storage for an application component or shared folder, select the application component or shared folder in the Content pane and then select Allocate Space in the Actions pane. A read-only copy of a volume at a specific point in time. Unlike a backup, data is not copied to any media during a snapshot. [. . . ]