User manual HP STORAGEWORKS 8/20Q FIBRE CHANNEL SWITCH

[. . . ] HP StorageWorks 8/20q Fibre Channel Switch QuickTools switch management user guide Part number: 5697-7465 Second edition: April 2008 Legal and notice information © Copyright 2008 Hewlett-Packard Development Company, L. P. Valid license from HP required for possession, use or copying. Consistent with FAR 12. 211 and 12. 212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U. S. Government under vendor's standard commercial license. [. . . ] The Admin account can also view and modify the switch and its configuration with QuickTools. Users with Admin authority can use QuickTools to view and modify the switch and its configuration. Users without Admin authority are limited to viewing only switch status and configuration. The Images account is used to exchange files with the switch using FTP. NOTE: If the same user account exists on a switch and its RADIUS server, that user can login with either password, but the authority and account expiration will always come from the switch database. Creating user accounts A switch can have a maximum of 15 user accounts. Figure 15 User Account Administration ­ Add Account dialog box To create a user account on a switch: 1. Click the Add Account tab to open the Add Account tab page (Figure 15). Enter an account name in the New Account Login field. Account names are limited to 15 characters. The first character must be alphanumeric. If the account is to have the ability to modify switch configurations, select the Admin Authority Enabled option. Enter a password in the New Password field and enter it again in the Verify Password field. A password must have a minimum of 8 characters and no more than 20. If this account is to be permanent with no expiration date, select the Permanent Account option. Otherwise, click Account Will Expire and enter the number days in which the account will expire. Click Add Account to add the newly defined account. Click Close to close the User Account Administration dialog box. Removing a user account To remove a user account on a switch: 1. Select Switch > User Accounts. 46 Managing switches 2. Click the Remove Account tab to open the Remove Account tab page (Figure 16). Select the account (Login) name from the list of accounts at the top of the dialog box. Click Close to close the User Account Administration dialog box. Figure 16 User Account Administration ­ Remove Account dialog box Changing a user account password A user can change the password for their account, but only the Admin account user can change the password for another user's account. If the user's original password is not known, the Admin account user must remove the account and then add the account with the new password. To change the password for an account on a switch: 1. [. . . ] A switch LED that indicates that the switch logic circuitry is receiving proper DC voltages. The connection between two switches using E_Ports. Loop Initialization Primitive sequence A port LED that indicates device login or loop initialization status. Maintenance button Formerly known as the Force PROM button. A momentary button on the switch used to reset the switch or place the switch in maintenance mode. [. . . ]