User manual HP STORAGEWORKS LUN SECURITY EXTENSION XP SOFTWARE LICENSE

[. . . ] HP StorageWorks LUN Security XP Extension user guide Part number: T1760-96007 Seventh edition: March 2007 Legal and notice information © Copyright 2005, 2007 Hewlett-Packard Development Company, L. P. Valid license from HP required for possession, use or copying. Consistent with FAR 12. 21 and 12. 212, 1 Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U. S. Government under vendor's standard commercial license. [. . . ] During the retention term, you can change Read Only to Protect, or vice versa. · Mode: Logical volume mode assigned by a RAID Manager XP user. · Zer: Zero Read Cap mode is assigned to the logical volume. If the Read Capacity command (a SCSI command) is issued to a logical volume in Zero Read Cap mode, the logical volume's capacity is reported as zero. · Inv: Invisible mode is assigned to the logical volume. If the Inquiry command (a SCSI command) is issued to a logical volume in Invisible mode, it is reported that the logical volume does not exist. Therefore, hosts cannot recognize the logical volume. · Zer/Inv: Zero Read Cap and Invisible mode are assigned to the logical volume. · Hyphen (-): No mode is assigned by RAID Manager XP to the logical volume. You cannot use LUN Security XP Extension to change modes. · LBA: If the logical volume is mapped to an external LU, this column displays the external LU's capacity (for example, the connected external LU's capacity). If the logical volume is not mapped to an external LU, this column displays a hyphen (-). When the volume list appears, the following items appear in the area under the volume list. · Operation: Operation's target or name. When no operation is performed, No Operation appears. · Logical volume's icons: When the volume list appears on the right area of the LUN Security XP Extension pane, icons appear in the lower right of Operation. Text to the right of an icon indicates an access attribute and includes the total number of logical volumes in the volume list. If VMA is set for the volume, VMA appears before the access attribute. For example, when there is one Read Only volume with VMA in the volume list, VMA Read Only:1 appears. Extent list This list appears in the right area of LUN Security XP Extension pane when you select a volume displayed under a CU image in the tree. The extent list contains extents in the selected volume and enables you to find the extent's access attribute or status. LUN Security XP Extension user guide 19 Figure 7 The Extent List The extent list provides the following: · Extent ID: Extent numbers. Extents are indicated by the following icons. Table 3 Icon Extent icons Description Extents that have the Read/Write attribute. [. . . ] The volume selected in the Candidate Volumes box moves to the Target Volumes box. To delete extents on other volumes in different CUs, repeat step 7 through step 9. The Setting Multiple Extents (Delete All Extents) pane closes, and the LUN Security XP 1. Settings are applied to the array, and all extents in the specified volumes are deleted. Viewing a list of logical volumes combined into a LUSE volume If logical volumes are combined into a LUSE volume, the LUN Security XP Extension pane does not display all of the combined volumes, but displays only the top LDEV. [. . . ]