User manual HP STORAGEWORKS PCI TO FC HOST BUS ADAPTER STORAGEWORKS EMULEX FIBRE CHANNEL HOST BUS ADAPTERS FOR PROLIANT AND INTEGRITY

[. . . ] · If you are installing the Linux operating system for the first time, load the operating system and then download and install the supported Linux HBA driver from the HP website: http://welcome. hp. com/country/us/en/support. html. Please refer to the section below for a list of HBA and Mezzanine part numbers. Product models The following HBAs and Mezzanine cards support Linux on ProLiant servers: · · · · · HP Emulex LPe12000 8Gb FC single channel HBA (product number AJ762A) HP Emulex LPe12002 8Gb FC dual channel HBA (product number AJ763A) HP Emulex LPe1105­HP 4Gb FC HBA for HP c-Class BladeSystem (product number 403621­B21) HP Emulex-based BL20p fibre channel Mezz HBA (product number 394757­B21) HP Emulex-based BL25/30/35/45p fibre channel Mezz HBA (product number 394588­B21) The following HBAs support Linux on ProLiant and Integrity servers: · HP StorageWorks FC2143 (product number AD167A) · HP StorageWorks FC2243 (product number AD168A) · HP StorageWorks FC2142SR (product number A8002A) · HP StorageWorks FC2242SR (product number A8003A) Devices supported The Emulex HBAs for Linux are supported on HP servers that: · Support the Linux operating systems described in"Operating systems" on page 4. · Support the servers listed on the HP website: http://www. hp. com/products1/serverconnectivity/support_matrices. html. · Support B-Series, C-Series, M-Series, and Q-Series (8/20q - ProLiant servers only) switch products. See the HP support website: http://welcome. hp. com/country/us/en/support. html for the latest information, as well as the HP StorageWorks SAN design reference guide at http://h18006. www1. hp. com/products/storageworks/san/documentation. html. [. . . ] If you have a previous driver kit installed, you can invoke the INSTALL command without any arguments as the script will use the currently loaded configuration: # . /INSTALL For SLES 10 SP1 only: #. /INSTALL -p 6 If you want to force the installation to failover mode, use the -m flag: For SLES 10 SP1 only: #. /INSTALL -mp · If you want to force the installation to single-path mode, use the -s flag: # . /INSTALL ­s For SLES 10 SP1 only: #. /INSTALL -sp The INSTALL script will install the appropriate driver RPM for your configuration, as well as the appropriate fibreutils RPM. Once the INSTALL script is finished, you will either have to reload the Emulex driver modules (lpfc, lpfcdfc and lpfcmpl) or reboot your server. To unload the driver, enter the following command: # modprobe ­r lpfcmpl NOTE: modprobe ­r lpfcmpl is for MultiPulse configuration only. # modprobe ­r lpfcdfc NOTE: modprobe ­r lpfcdfc is for RHEL 4 Ux and SLES 9SPx. # modprobe ­r lpfc The commands to load the driver are: # modprobe lpfc # modprobe lpfcdfc NOTE: modprobe lpfcdfc is for RHEL 4 Ux and SLES 9SPx. # modprobe lpfcmpl NOTE: modprobe lpfcmpl is for MultiPulse configuration only. The command to reboot the server is: #reboot If your boot device is a SAN attached device, you will have to reboot your server. To verify what RPM driver version is installed, use the RPM command with the -q option. Example 1. # rpm -q hp-lpfc # rpm -q hp-multipulse For MultiPulse configuration only: # rpm -q fibreutils HP StorageWorks Emulex fibre channel host bus adapters for ProLiant and Integrity servers using Linux and VMware operating systems release notes 7 Installing HBAnyware To install HBAnyware: 1. Download the file HP_ElxApps-<Kernel Version>-<HBAnyware Version>-<Driver Version>. zip to the target system. HP_ElxApps-26-3. 2a16-8. 1. 10. 11. zip NOTE: Please refer to Table 1, 2, 3, 4 and 5 for HBAnyware and Driver version info. Kernel Version : 26 for 2. 6 Kernels and 24 for 2. 4 Kernels. # unzip HP_ElxApps-26-3. 2a16-8. 1. 10. 11. zip 3. # chmod +x HP_ElxApps-26-3. 2a16-8. 1. 10. 11. bin 4. #. /HP_ElxApps-26-3. 2a16-8. 1. 10. 11. bin 5. # HBAnyware or # /usr/sbin/hbanyware/hbanyware NOTE: Refer to application's online help for more information. HBAnyware 3. 4a16 has a known presentation issue with the 8. 0. 16. 40 driver along with the AJ762A and AJ763A HBAs. This will be fixed in a future release. Languages American English Important information Restrictions This section describes restrictions that apply to Linux and this release of HBAs: · SuSE10 SP1 has a known issue related to Boot hang and udev timeout. To correct the issue, use the . /INSTALL script with the ­p flag. See the above section, "Installing the Linux device driver using the HP kit" on page 6for more installation options. · The Emulex MultiPulse 2. 2. 22 and 2. 2. 38 driver only supports active/active storage arrays. [. . . ] Go to the /proc/scsi/lpfc directory to view a list of SCSI HBAs. A numbered file (such as 0 or 1) represents each HBA on the system. Open the file to view the version information. 2. 6 kernels To view driver and firmware information: 1. Go to the /sys/class/scsi_host directory to view a list of SCSI HBAs. [. . . ]