User manual HP STORAGEWORKS XP LUN CONFIGURATION AND SECURITY MANAGER SOFTWARE

[. . . ] HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP1024/XP128 Part number: T1614-96005 Third edition: March 2006 Legal and notice information © Copyright 2005, 2006 Hewlett-Packard Development Company, L. P. Valid license from HP required for possession, use or copying. Consistent with FAR 12. 211 and 12. 212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U. S. Government under vendor's standard commercial license. [. . . ] NOTE: Use the vertical scroll bar to view all the items. 5. Edit the items below the drop-down list. A message appears asking if you want to change the port settings. Settings are applied to the Port table, but not to the disk array. A message appears asking if you want to apply the setting to the disk array. NOTE: If a message appears prompting you to register the iSCSI port, click Yes. If the registration process finishes, a pane appears indicating if the registration ended successfully. If the registration ended successfully, the pane displays Success. If the registration failed, the pane displays the error code and error message. Resolve the error and retry registration by clicking Register in the iSCSI Function box in the Port tab. Removing information about an iSCSI port from an iSNS server 1. In the Port tab, click Delete in the iSCSI Function box. The Delete iSNS Information pane appears. Select an iSCSI port from the Subsystem Port Name. The IP address of the iSNS server appears in the iSNS Server IP Address. Also, the port number of the iSNS server appears in the iSNS Server Port Number. Information about the iSCSI port is removed from the iSNS server, and the iSCSI port is unregistered from the iSNS server. Checking the status of connection between hosts and the disk array (iSCSI environment only) In an iSCSI environment, use LUN Manager to issue a ping command from a disk array port to a host. The ping command checks whether the host and disk array can communicate with each other. If the host responds to the ping command, the host and disk array can communicate with each other. Issuing a ping command from an iSCSI port to a host 1. Ensure that the Port tab is displayed in the pane. Select an iSCSI port from From (Subsystem Port). Enter the IP address of the host in To (IP Address). A ping command is issued from the iSCSI port to the host five times. [. . . ] The new setting is implemented into the subsystem and a message notifies you that the implementation is complete. Confirm that the volume is listed as Blocked in the Status column of the Parity Group - LDEV table. To specify blocked volumes to format, do one of the following: · Select the volume with Blocked status in the LDEV Information table, right-click, and select Format. · To format all blocked internal and external volumes, right-click LDEV at the top of the tree, and select All Format. [. . . ]