User manual HP STORAGEWORKS XP REMOTE WEB CONSOLE SOFTWARE

[. . . ] Hitachi SANtinel for z/OS user guide Part number: HITA744-96003 Third edition: March 2007 Legal and notice information © Copyright 2005, 2007 Hewlett-Packard Development Company, L. P. Valid license from HP required for possession, use or copying. Consistent with FAR 12. 21 and 12. 212, 1 Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U. S. Government under vendor's standard commercial license. [. . . ] From the SANtinel window, right-click LDEV Group. A pop-up menu is displayed. SANtinel for z/OS user guide 21 2. The Add/Change LDEV Group window is displayed. Figure 8 Add/Change LDEV Group window 3. In the Enter LDEV Group box, enter the name of the LDEV group that you want to create, and then click Add. LDEV group names can be up to eight characters and are case-sensitive. The first character and the last character must not be a space. Also, the following characters are unusable in host group names: \ , /:; *?"<>| 4. Confirm that the new LDEV group is shown in blue in LDEV Group List, and then click OK. The settings are applied to the disk array. Registering Logical Volumes in an LDEV Group After creating an LDEV group, register the logical volumes in an LDEV group. To register logical volumes in an LDEV group: 1. From the SANtinel window, right-click LDEV Group. A pop-up menu is displayed. 22 SANtinel for the XP12000/XP10000/XP1024/XP128 2. Click Specify and then LDEV from the pop-up menu. The Select LDEV window is displayed. Figure 9 Select LDEV window 3. The tables located below the list display the logical volumes in the CU image you selected. The Registered in LDEV group table displays the logical volumes registered in the LDEV group. The Not registered in LDEV group table displays logical volumes that are not registered in the LDEV group. In the Not registered in LDEV group table, click the logical volumes that you want to register. Then, click the < button to move the selected logical volumes move to the Registered in LDEV group table. To register logical volumes in other CU images, repeat the previous steps. The settings are applied to the disk array. Creating a Security Group for Use As an Access Group To make security settings, you must create security groups. You can classify security groups as access groups or pool groups. To allow logical volumes to be accessed only by specified hosts, classify a security group as an access group. To create a security group and classify the group as an access group: 1. [. . . ] In the tree view of the SANtinel window, right-click an item except for a host group or LDEV group that is displayed immediately below a security group. From the pop-up menu, click List -> Host Group to Security Group. The Host Group to Security Group window is displayed. Figure 29 Host Group to Security Group window 3. In the Host Group list, click the host group. [. . . ]