User manual HP SURESTORE DLT 4000 15 TAPE LIBRARY

[. . . ] HP SureStore DLT Tape Library User's Guide Models 4115w/4215w, 7115w/7215w Part Number C5173-90000 Edition 4 September 1998 Printed in United States Copyright 1998 Hewlett-Packard Company Notices This document contains information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Hewlett-Packard Company. The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this printed material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. [. . . ] To open the access door when a security option prevents the door from being released, use the OVERRIDE DOOR option under the ADMIN * menu (Figure 3-2 on page 3-8). Unlock the access door using the key. 3-16 Operating the Library Loading Tape Cartridges Into the Library 6. Open the access door by pulling the top of the door outward. NOTE Figure 3-3 Do not let the door fall open. Opening the Front Access Door Library Operation 7. Insert up to five tape cartridges into a magazine so that the tape brand name printed on the top of the cartridge is facing up and the tape label is facing out. The tapes should "click" into place. Figure 3-4 Loading Tape Cartridges into the Magazine 3-17 Operating the Library Loading Tape Cartridges Into the Library 8. Insert the magazine so it lines up with the arrow on the label inside the library, the handle is facing the front of the library, and the tapes are facing the inside of the tape library. The magazine should "click" into place. Shut and lock the access door using the key lock. NOTE The library INVENTORY CHECK test runs when the access door is closed so that an inventory of tape bar code labels and storage slot locations can be stored into library memory. The test fails if the door is not completely shut. Do not attempt to disable the interlocks. If the library is operating with fewer than three magazines inserted and the door open, the user can be exposed to Class II laser light emitted from the bar code reader. WARNING 3-18 Operating the Library Removing Tape Cartridges from the Library Removing Tape Cartridges from the Library The tape library is designed to hold from one to three 5-slot magazines. Follow these steps to remove magazines from the library: NOTE Some software packages require that tape cartridges be inserted and removed using the software. If a software package manages files in the library, check the software documentation before proceeding. All drives must be empty before the access door can be released. In addition, some security configurations may prevent the access door from being released. If a security option is enabled, SECURITY ENABLED displays after the RELEASE DOOR option is chosen. To remove magazines from the library: 1. Verify that the drive status displays (if not, press CANCEL until it does). [. . . ] A removable part of the library used to insert, remove, and store tape cartridges in the library. D digital linear tape. Digital linear tape (DLT) drives read and write data to digital linear tape in straight tracks that run the full length of the tape. The read/write head moves vertically to read from or write to the tracks on the tape. Glossary Glossary-1 Glossary P peripheral device . A product used in conjunction with a computer, that is physically separate but that is under the computer's control. [. . . ]