User manual HP SYSTEM MANAGEMENT HOMEPAGE SOFTWARE

[. . . ] HP Insight Management Agents User Guide Part number: 308447-004A Fourth edition: March 2006 Legal notices © Copyright 2002--2006 Hewlett-Packard Development Company, L. P. Valid license from HP required for possession, use or copying. Consistent with FAR 12. 211 and 12. 212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U. S. Government under vendor's standard commercial license. [. . . ] · Status--Displays the status of the logical drive. The logical drive can be in one of the following states: · · · · OK--Indicates that the logical drive is in normal operation mode. Failed--Indicates that more physical drives have failed than the fault tolerance mode of the logical drive can handle without data loss. Unconfigured--Indicates that the logical drive is not configured. Interim recovery--Indicates that the logical drive is using Interim Recovery Mode. In Interim Recovery Mode, at least one physical drive has failed, but the logical drive's fault tolerance mode lets the drive continue to operate with no data loss. Ready rebuild--Indicates that the logical drive is ready for Automatic Data Recovery. The physical drive that failed has been replaced, but the logical drive is still operating in Interim Recovery Mode. Rebuilding--Indicates that the logical drive is currently doing Automatic Data Recovery. During Automatic Data Recovery, fault tolerance algorithms restore data to the replacement drive. Storage Agent information 88 · · When the status is Rebuilding one of the following will be displayed to indicate the progress of the rebuild. · Percent Rebuild Complete--Displays the percent complete of the rebuild. When the value reaches 100, the rebuilding process is complete. The drive array continues to operate in interim recovery mode while the drive is rebuilding. Rebuild Blocks Left--Displays the number of blocks of data that still must be redistributed. When the value reaches 0, the rebuilding process is complete. The array continues to operate in interim recovery mode while the drive is rebuilding. Rebuilding Drive--Identifies the physical drive that failed. The logical drive is rebuilding using a spare drive in place of this failed drive. · · · · · · · Wrong drive--Indicates that the wrong physical drive was replaced after a physical drive failure. Bad connect--Indicates that a physical drive is not responding. Overheating--Indicates that the drive array enclosure that contains the logical drive is overheating. The drive array is still functioning but should be shut down. Shutdown--Indicates that the drive array enclosure that contains the logical drive has overheated. [. . . ] Servers and clients cannot be managed devices unless they have HP Management Agents installed. The document or file that defines all manageable traps known to the management agent and management application. The PC, workstation, or server that is running HP Systems Insight Manager. The item that HP Insight Manager manages or monitors, or the information that HP System Insight Manager collects. [. . . ]