User manual HP TANGO

[. . . ] Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U. And other countries and is used under license. 1 Use the HP Smart app to print, copy, scan, and troubleshoot . [. . . ] Make sure that paper loaded in the input tray lays flat, and the edges are not bent or torn. Adjust the paper-width guides in the input tray to fit snugly against all paper. Make sure the paper-width guides do not bend the paper in the input tray. Printer settings tips Printer settings tips (Windows) ● To change default print settings, open the HP printer software, click Print , and then click Set Preferences. For information how to open the printer software, see Open the HP printer software (Windows). To understand paper and paper tray settings: ● ENWW Tips for print success 47 – – ● Paper Size: Select the paper size you loaded in the input tray. Media: Select the paper type you are using. To understand color or black and white settings: – – – Color: Uses ink from all cartridges for full color prints. Black & White or Black Ink Only: Uses the black ink only for normal or lower quality black and white prints. High Quality Grayscale: Uses ink from both the color and black cartridges to produce a wider range of black and grey tones for high quality black and white prints. ● To understand print quality settings: The print quality is measured in print resolution dots per inch (dpi). Higher dpi produces clearer and more detailed prints, but slows print speed and might use more ink. € – – – Draft: Lowest dpi typically used when ink levels are low or when high quality prints are not needed. — To understand page and layout settings: – – Orientation: Select Portrait for vertical prints or Landscape for horizontal prints. Print on Both Sides: Manually flip the pages after one side of the paper prints out so that you can print on both sides of the paper. — ○ – Flip on Long Edge: Select it if you want to flip pages by the long edge of the paper when printing on both sides of the paper. Flip on Short Edge: Select it if you want to flip pages by the short edge of the paper when printing on both sides of the paper. Pages per Sheet: Helps you specify the order of the pages if you print the document with more than two pages per sheet. 48 Chapter 5 Print ENWW 6 Manage cartridges This section contains the following topics: ● ● ● ● ● ● ● Check estimated ink levels Order ink supplies HP Instant Ink Replace cartridges Use single cartridge mode Cartridge warranty information Tips for working with cartridges ENWW 49 Check estimated ink levels You can easily check the ink supply level to determine how soon you might need to replace a cartridge. The ink supply level shows an estimate of the amount of ink remaining in the cartridges. NOTE: ● ● If you have installed a refilled or remanufactured cartridge, or a cartridge that has been used in another printer, the ink level indicator might be inaccurate or unavailable. Ink level warnings and indicators provide estimates for planning purposes only. [. . . ] European Union Commission Regulation 1275/2008 For product power data, including the power consumption of the product in networked standby if all wired network ports are connected and all wireless network ports are activated, please refer to section P14 ‘Additional Information’ of the product IT ECO Declaration at www. Safety data sheets Safety Data Sheets, product safety and environmental information are available at www. Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at: www. [. . . ]