User manual HP VECTRA VEI8

[. . . ] No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. AMIDIAG is a trademark of American Megatrends Inc. Acrobat is a trademark of Adobe Systems Inc. Sound Blaster is a trademark of Creative Technology Ltd. [. . . ] The Real Time Clock is running at a slower rate. 46 English Appendix A The Error Codes 0001h ­ 00CCh: System Error Codes Code 0062h 0063h Explanation The Real Time Clock is running at a faster rate. The date and time read from Real Time Clock CMOS RAM are different from that of written. The battery backup unit that powers CMOS RAM has no power. Bad CMOS RAM checksum detected. Details/Parts to Check Real Time Clock (RTC) error. If error persists, install new system board. If error persists, install new system board. If error persists, install new system board. If error persists, install new system board. Re-start system and check BIOS setup parameters. If error persists install new system board. Re-start system and check BIOS setup parameters. Out of memory. Details/Parts to Check Install new system BIOS. If error persists, install new system board. Re-run the HP Hardware Diagnostics utility using keyboard only. 50 English Appendix A The Error Codes 0100h ­ 01A4h: Memory Error Codes 0100h ­ 01A4h: Memory Error Codes Code 0100h 0101h 0102h 0120h 0130h Explanation ROM read error. DiagTools was not able to read from a ROM location. BIOS cannot set the year to 2000 after 1999 midnight. Parity error at absolute memory location XXXXXXXXh. The pattern written at XXXXXXXXh was qqqqh. The pattern read back from that address was pppph. Parity failure at XXXXXXXXh during pattern test. ECC correctable error in SIMM/DIMM socket XXXX/YYYY ECC can not be corrected. Error occurred on bank XXXX interleave YYYY Failure at address XXXXXXXXh, bit position bbh. Details/Parts to Check System board error. [. . . ] Fails in executing an external program. 1500h ­ 1503h: Modem Error Codes Code 1500h 1501h 1502h 1503h No modem. Explanation Details/Parts to check Modem not found. Power on the modem and re-run the diagnostic test. Ensure that the line cable is plugged in. IRQ test failed. Dial tone failed. English 79 Appendix A The Error Codes 9600h ­ 960Fh: IDE Disk Error Codes 9600h ­ 960Fh: IDE Disk Error Codes Code 09602h 09603h Explanation Bad Smart status Smart attributes modification Details/Parts to Check Hard disk error. [. . . ]