User manual HP Z560

[. . . ] HP Digital Entertainment Center User's Guide The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. HP assumes no responsibility for the use or reliability of its software on equipment that is not furnished by HP. [. . . ] In TV Source 1 In TV Source 2 In TV Source 1 In Or Cable/Ant. In TV Source 1 In TV Source 2 In TV Source 1 In (to record HDTV in standard format) NTSC satellite One satellite receiver Two satellite receivers NTSC and ATSC digital cable or satellite One NTSC and ATSC digital cable or satellite receiver Two NTSC and ATSC digital cable or satellite receivers TV Source 1 In and TV Source 2 In (to record HDTV in standard format) Then see: "Infrared Transmitter Connection" on page 97 (cable TV box, digital cable receiver, or satellite receiver only) "Connecting Video Equipment" on page 101 Connecting TV Source In 79 Connecting TV Source In TV source type (continued) Display/video configuration Antenna Connection (Location, availability, and number of connectors may vary. ) Antenna (NTSC) : If you are using a NTSC UHF/VHF broadcast television antenna (sold separately) with no cable TV box, digital cable box, or satellite receiver, do the following to connect the TV signal source: Roof TV Antenna VHF Antenna UHF Antenna 1 Plug the connector of a coaxial cable from your external or internal TV antenna into the Cable/Ant. In connector on the back of the HP Digital Entertainment Center. CABLE/ANT. IN DUAL TUNER 2 Turn the connector to tighten it. Coaxial AUDIO OUT L AUDIO 7. 1 PRE-OUT SURROUND SURROUND BACK L L CENTER FRONT L WIRELESS LAN Y 802. 11 a/b/g ACTIVITY LINK CABLE/ANT. IN FM ANTENNA IN REMOVABLE ANTENNA Pb R TV SOURCE 1 IN L Pr 100-240V- 4/A 50/60Hz AC IN R R R SUB WOOFER R AUDIO VIDEO S-VIDEO DUAL TUNER 75 COAXIAL TV SOURCE 2 IN HDTV / SDTV ANT. IN COAXIAL 10/ 100/ 1000 R AUDIO L S-VIDEO ATSC TUNER OPTICAL INFRARED TRANSMITTER OUT 2 1 AUDIO OUT DIGITAL HI SPEED USB 2. 0 1394 ETHERNET TV signal source -- TV antenna 80 HP Digital Entertainment Center : To connect an HDTV signal source to your HP Digital Entertainment Center, do the following: Roof Antenna VHF Antenna 1 Connect a coaxial cable from your UHF/VHF antenna into the HDTV/SDTV Ant. In connector on the back of the HP Digital Entertainment Center. HDTV / SDTV ANT. IN ATSC TUNER UHF Antenna 2 Turn the connector to tighten it. Cable From Wall Coaxial Coaxial AUDIO IN L AUDIO 7. 1 PRE-OUT SURROUND SURROUND BACK L L CENTER FRONT L VIDEO VIDEO OUT Y WIRELESS LAN REMOVABLE ANTENNA 802. 11 b/g ACTIVITY LINK CABLE/ANT. IN FM ANTENNA IN Pb DVI R TV SOURCE 1 IN L Pr 100-240V- 4/A 50/60Hz AC IN R R R SUB WOOFER R S-VIDEO COMPONENT VGA AUDIO VIDEO S-VIDEO DUAL TUNER 75 COAXIAL TV SOURCE 2 IN HDTV / SDTV ANT. IN COAXIAL 10/ 100/ 1000 R AUDIO L S-VIDEO ATSC TUNER OPTICAL INFRARED TRANSMITTER OUT 2 1 DIGITAL AUDIO OUT HI SPEED USB 2. 0 1394 ETHERNET DIGITAL VIDEO OUT TV signal source -- HDTV antenna Connecting TV Source In 81 Connecting TV Source In Antenna (ATSC) Antenna (NTSC and ATSC) If you are using a VHF and UHF broadcast television antenna (sold separately) with no cable TV box, digital cable box, or satellite receiver, do the following to connect the NTSC and ATSC TV signal source to your HP Digital Entertainment Center: 1 Install a splitter (provided) as shown in the following illustration (select models only). Connect the splitter input to the antenna (outdoor shown). 2 Connect two coaxial cables to the splitter outputs. Turn the connectors to tighten them. Roof Antenna VHF Antenna UHF Antenna 3 Connect a coaxial cable into the Cable/Ant. In connector on the back of the HP Digital Entertainment Center. Turn the connector to tighten it. CABLE/ANT. IN DUAL TUNER 4 Connect a coaxial cable into the HDTV/SDTV Ant. In connector on the back of the HP Digital Entertainment Center. Turn the connector to tighten it. HDTV / SDTV ANT. IN Cable From Wall ATSC TUNER Coaxial Coaxial AUDIO OUT L AUDIO 7. 1 PRE-OUT SURROUND SURROUND BACK L L CENTER FRONT L WIRELESS LAN Y 802. 11 a/b/g ACTIVITY LINK CABLE/ANT. IN FM ANTENNA IN REMOVABLE ANTENNA Pb R TV SOURCE 1 IN L Pr 100-240V- 4/A 50/60Hz AC IN R R R SUB WOOFER R AUDIO VIDEO S-VIDEO DUAL TUNER 75 COAXIAL TV SOURCE 2 IN HDTV / SDTV ANT. IN COAXIAL 10/ 100/ 1000 R AUDIO L S-VIDEO ATSC TUNER OPTICAL INFRARED TRANSMITTER OUT 2 1 AUDIO OUT DIGITAL HI SPEED USB 2. 0 1394 ETHERNET HDTV and standard signal source -- TV antenna 82 HP Digital Entertainment Center Cable Connection (Location, availability, and number of connectors may vary. ) Cable (NTSC) and Antenna (ATSC) . To connect standard cable without a set-top box and a HDTV/SDTV Ant. In input to your HP Digital Entertainment Center, do the following to connect the NTSC and ATSC TV signal sources: Roof Antenna VHF Antenna UHF Antenna 1 Plug the connector of a coaxial cable from your TV cable (wall) into the Cable/Ant. In connector on the back of the HP Digital Entertainment Center. CABLE/ANT. IN DUAL TUNER Cable From Wall 2 Turn the connector to tighten it. 3 Connect the coaxial cable from the UHF/VHF antenna into the HDTV/SDTV Ant. [. . . ] Some models may not have online manuals. Application and System Recovery Programs The HP Digital Entertainment Center uses the operating system and installed software programs during normal operation. If your HP Digital Entertainment Center works improperly or stops because of the software, you may be able to repair it by restarting the HP Digital Entertainment Center, using System Restore, or using other methods including the System Recovery programs. Two blank DVD-R discs are included with the HP Digital Entertainment Center system. You can use these DVD-R discs to create System Recovery discs that you can use to recover your system. [. . . ]