User manual HUBBELL LIGHTING NRG-200

[. . . ] This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. b Notice · If static electricity or electromagnetic interference causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the USB cable again. 2 For customers in the U. S. A. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-HUBBELL LIGHTING (7669) The number below is for FCC related matters only. Regulatory Information Declaration of Conformity Trade Name: HUBBELL LIGHTING Model No. : NRG-200 Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ 07649 U. S. A. [. . . ] For NRG-200: Hi8 /standard 8 mm system: Select to play back a stereo tape with monaural sound or a dual sound track tape with main sound. Digital8 system: Select to play back a stereo tape with the right channel sound or a dual sound track tape with sub sound. For NRG-200: Hi8 /standard 8 mm system: Select to play back a stereo tape with unnatural sound or a dual sound track tape with sub sound. 2 b Notes · You can playback a dual sound track cassette on your camcorder. However, you cannot record a dual sound track on your camcorder. · The setting returns to [STEREO] when you disconnect the power source from your camcorder for more than 5 minutes. Using the Menu TBC For NRG-200: GON OFF Select to correct jitter (horizontal picture shake during playback). Select to not compensate picture distortion when playing back a tape on which you have dubbed repeatedly or recorded TV game signals. b Note · The TBC function works only with tapes recorded on other devices in the Hi8 standard 8 mm system. / DNR For NRG-200: GON OFF Select to eliminate color noise in the picture. Select to minimize picture artifacts in a picture containing lots of movement. b Note · The DNR function works only with tapes recorded on other devices in the Hi8 standard 8 mm system. / , continued Using the Menu 77 AUDIO MIX You can adjust the audio balance between the main sound (ST1) and the sub sound (ST2) on the tape. b Notes · You cannot adjust sound recorded in 16 bit audio mode. · Only the originally recorded sound will be heard when you disconnect the power source from your camcorder for more than 5 minutes. · For NRG-200: You cannot adjust the balance for tapes recorded on other devices in the Hi8 / standard 8 mm system. LCD SET The recorded picture will not be affected by this setting. LCD BRIGHT See page 18 for details. LCD BL LEVEL You can adjust the brightness of the LCD screen's backlight. GNORMAL BRIGHT Standard brightness. Select to brighten the LCD screen. b Notes · When you connect your camcorder to outside power sources, [BRIGHT] is automatically selected for the setting. · When you select [BRIGHT], battery life is reduced by about 10 percent during recording. LCD COLOR Touch / to adjust the color on the LCD screen. Low intensity High intensity 78 Using the Menu A/V c DV OUT You can connect a digital device and an analog device to your camcorder and convert the signal transmitted from the connected devices to the appropriate signal on your camcorder. GOFF ON ( ) Select when not using the Digital convert function. Select to cancel the melody, the beep sound, the shutter sound or touch panel operation confirmation beep. DISPLAY Using the Menu GLCD PANEL V-OUT/PANEL Select to show the displays such as the time code on the LCD screen and in the viewfinder. Select to show the displays such as the time code on the TV screen, LCD screen, and in the viewfinder. b Note · You cannot input a signal to your camcorder if you press DSPL/BATT INFO while [VOUT/PANEL] is selected. MENU ROTATE You can select the scrolling direction (up or down) of the menu items on the LCD screen when you touch or . GNORMAL OPPOSITE Select to scroll the menu items downwards by touching Select to scroll the menu items upwards by touching . . A. SHUT OFF G5 min Select to activate the Auto shut off. When approximately 5 minutes have elapsed while you do not operate your camcorder, the camcorder is automatically turned off to prevent the battery from becoming consumed. Select to deactivate the Auto shut off. NEVER b Note · When you connect your camcorder to the wall outlet, [A. SHUT OFF] is automatically set to [NEVER]. Using the Menu 81 Using the (TIME/ LANGU. ) menu ­ CLOCK SET/ WORLD TIME, etc. You can select items listed below on the TIME/ LANGU. To select items, see "Selecting menu items" (p. 59). on the power mode of your camcorder. The screen shows the items you can currently operate. Unavailable items will be grayed out. 60min STBY 0:00:00 TIME/LANGU. CLOCK SET WORLD TIME LANGUAGE OK The settings you can adjust vary depending CLOCK SET You can set the date and time (p. 19). WORLD TIME You can adjust the time difference when using your camcorder abroad. Set the time difference by touching / , the clock will be adjusted in accordance with the time difference. [. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Fine (FINE) See Image quality (QUALITY) Flash motion (FLASH) . . . . . . 41 132 Quick Reference LP (Long Play) See Recording mode (REC MODE) Luminance key (LUMI. KEY). . . . . . . . . . . . . . 41 Operation confirmation beep See BEEP OVERLAP. . . . . . . . . . . . . . . . . . . . . . . . . 40 P PAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Personal Menu (P-MENU) . . . . . . . . . . . . . . . . . . [. . . ]