User manual HUBBELL LIGHTING R175C (REV.A)

[. . . ] That the water inlet and outlet hoses are connected correctly; 3. That the dishwasher is level on the ground. It is worth it: for the longer life span and the correct operation of your dishwasher. 13) Learn to get to know the parts which make up your dishwasher, you will use it better for it. [. . . ] You can choose from six different positions. Warning Three-in-one dishwasher tablets are now available on the market, and combine detergent, salt and rinse aid all in one. If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent the formation of white streaks on your dishes or on the interior of the appliance. Using a three-in-one product means it is no longer necessary to put rinse aid into the relevant container. If you want to achieve perfectly dry dishes, you may add rinse aid as long as the dosage adjuster is set to no. In any case, please read the manufacturer's instructions on the packet. If you use only these products, it is normal for the salt and rinse aid indicator lights to flash permanently after a certain number of cycles. 16 ARISTON DISHWASHER - Instructions for installation and use A wash cycle for every degree of soil Select the right wash cycle D ISHWASHER Salt, rinse aid, the right amount of detergent and the this is the formula to get the best results and to keep shape Note: in the auto wash cycles, the cycles some modifications due to the intervention which evaluates how dirty the dishes are the cycle in accordance. "AUTO" wash cycles This means that your dishwasher is equipped with correct wash cycle: a sensor which evaluate how your dishwasher in dirty your dishes are and allows these wash cycles to adjust automatically, to could undergo provide you with a more of the sensor efficient and economic wash and optimises cycle.  ARISTON DISHWASHER - Instructions for installation and use 17 D ISHWASHER Never Loading the salt. Always use salt which is intended for dishwasher use. And then adjust the height using the withstand extremely high pres- First of all, check that the mains screws located on the front bottom sures. Should the inner hose break, voltage and frequency values part of the machine. Use a the outer hose will consequently correspond to those stated on the screwdriver to turn the screws in turn red. Safety in the event of rating plate located on the stainless the clockwise or anti-clockwise flooding is ensured by the second steel inner door of the appliance direction to increase or decrease clear hose that contains the former. And that the electrical system to the height respectively. It is vital that you check the outer which the dishwasher is connected hose regularly: if you see it has is sized for the maximum current Cold water connection. Turned bright red, then you know indicated on said rating plate. Connect the cold water supply you have to replace it as soon as hose to a 3/4 gas threaded possible. Call for an authorised Earth: indispensable connection, taking care to screw it technical engineer to come and safety. Only now can you plug the tightly onto the tap. Appliance into a socket provided hoses are new or have been out of with an efficient earth connection use for an extended period of time, Drain hose connection. [. . . ] Check the sprayer arms regularly and clean them once in a while (letters F and I “How is it made?C Keep your dishwasher in shape Respecting these few rules ensures you will always have a reliable work companion by your side. When the wash cycle has ended, always remember to turn off the water supply tap and to leave the appliance door ajar. This way, moisture and bad odours will not be trapped inside. [. . . ]