User manual HUBBELL LIGHTING REMOTE HANGER ASSEMBLY

[. . . ] Even if the camcorder is turned off, the GPS function is working as long as the GPS switch is set to ON. Make sure that the GPS switch is set to OFF during take off and landing of an airplane (HDR-CX350V/XR350V). Menu items, LCD panel, and lens (software, including "PMB Help") Handbook (PDF) "Operating Guide" (1) See page 18 for the memory card you can use with this camcorder. Using the camcorder Do not hold the camcorder by the following parts, and also do not hold the camcorder by the jack covers. A menu item that is grayed out is not available under the current recording or playback conditions. The LCD screen is manufactured using extremely high-precision technology, so over 99. 99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue, or green in color) that appear constantly on the LCD screen. [. . . ] 68) at the same time. Notes [EXPOSURE] is automatically set to [MANUAL]. SPOT FOCUS You can select and adjust the focal point to aim it at a subject not located at the center of the screen. Touch the subject in the frame of which you want to adjust the brightness and focus. To adjust the brightness and focus automatically, touch [AUTO]. Notes [EXPOSURE] and [FOCUS] are automatically set to [MANUAL]. Touch the subject in the frame of which you want to adjust the focus. To adjust the focus automatically, touch [AUTO]. Notes [FOCUS] is automatically set to [MANUAL]. EXPOSURE You can fix the brightness of a picture manually. Adjust the brightness when the subject is too bright or too dark. SPOT METER (Flexible spot meter) You can adjust and fix the exposure to the subject, so that it is recorded in suitable brightness even when there is strong contrast between the subject and the background, such as subjects in the spotlight on stage. Touch / to adjust the brightness. To adjust the exposure automatically, touch [AUTO]. 68 US FOCUS You can adjust the focus manually. You can select this function also when you want to focus on a certain subject intentionally. TELE MACRO This is useful to shoot small subjects, such as flowers or insects. You can blur out backgrounds and the subject stands out clearer. (TELE MACRO is also canceled when you move the zoom lever to the W side. ) Touch (nearby subject)/ (distant subject) to adjust the focus. To adjust the focus automatically, touch [AUTO]. Notes When you set [FOCUS] to [MANUAL], appears. The minimum possible distance between camcorder and subject while maintaining sharp focus is about 1 cm (about 13/32 in. ) for wide angle and about 80 cm (about 31 1/2 in. ) for telephoto. ON ( ) The zoom (p. 24) moves to the top of the T (telephoto) side automatically and allows recording subjects at a close distance down to about 25 cm (about 9 7/8 in. ). Tips appears when the focus cannot be adjusted any closer, and appears when the focus cannot be adjusted farther away. Notes If you change the setting of [ STEADYSHOT], the imaging field will also change accordingly. You can magnify images up to 12 times using optical zooming, unless [ STEADYSHOT] is set to [ACTIVE]. REC MODE (Recording mode) See page 25. GUIDEFRAME You can display the frame and check that the subject is horizontal or vertical. Does not display the guide frame. CONVERSION LENS When using a conversion lens (sold separately), use this function to record using the optimum compensation for camera shake and focus for the lens. OFF Select this when you do not use a conversion lens. Customizing your camcorder WIDE CONVERSION ( ) Select this when you use a wide-conversion lens. Tips Positioning the subject at the cross point of the guide frame makes a balanced composition. The outer frame of [GUIDEFRAME] shows the display area of a TV which is not compatible with full pixel display. TELE CONVERSION ( ) Select this when you use a tele-conversion lens. Notes The built-in flash is not flashed when [CONVERSION LENS] is set to other than [OFF], you cannot also set [FLASH MODE] (p. 75). STEADYSHOT You can compensate for camera shake. Set [ STEADYSHOT] to [OFF] ( ) when using a tripod (sold separately), then the image becomes natural. 1 US LOW LUX You can record bright color images, even in dim light. OFF The LOW LUX function is not used. PRIORITY SETTING Selects the priority subject for the face detection or the smile shutter. Adjusts focus/color/exposure automatically for the selected faces. AUTO Detects faces automatically. ON ( ) The LOW LUX function is used. CHILD PRIORITY FACE DETECTION Detects the faces of your subjects and adjusts the focus/color/exposure automatically. [. . . ] When you are recording movies with an external flash (sold separately) connected to the accessory shoe, turn off the power of the external flash to prevent charging noise being recorded. You cannot use an external flash (sold separately) and the built-in flash at the same time. When an external microphone (sold separately) is connected, it takes precedence over the built-in microphone. REMOTE HANGER ASSEMBLY/CX350/CX350V/CX370 Lens (G lens) Flash Camera recording lamp (84) The camera recording lamp lights up in red during recording. The lamp flashes when the remaining recording media capacity or battery power is low. [. . . ]