User manual HUBBELL LIGHTING RL

[. . . ] Without prejudice to any other rights, HUBBELL LIGHTING may terminate this LICENSE if you fail to comply with the terms and conditions of this LICENSE. In such event, you must stop using the SOFTWARE and all of its component parts. The provisions of this LICENSE "COPYRIGHT, " "HIGH RISK ACTIVITIES, " "EXCLUSION OF WARRANTY ON SOFTWARE, " "LIMITATION OF LIABILITY, " "PROHIBITION ON EXPORT, " "SEVERABILITY, " and "GOVERNING LAW AND JURISDICTION" Sections, "Confidentiality" Paragraph of this Section and The SOFTWARE is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. This LICENSE grants you the following rights on a non-exclusive basis: SOFTWARE. [. . . ] This section describes how to use the GPS functions equipped with your camcorder and also provides some important notes on using. Read the following instructions and also refer to the supplied "Operating Guide" before using your camcorder. The GPS (Global Positioning System) is a system that calculates geographical location from highly accurate US space satellites. This system allows you to pinpoint your exact location on the earth. GPS functions you can use map Index You can find a movie or photo on a map by its recording location. Your camcorder adjusts the clock and the time difference on each area automatically. How to use the GPS function set the GPS switch to ON ( appears on the LCD screen). Your camcorder starts trying to triangulate. When your camcorder triangulates successfully, it will record the location information at the time movies and photos were recorded. Notes The indicator changes according to the strength of GPS signal reception. Your camcorder cannot find a GPS signal, therefore, it cannot triangulate. The point you touch on the map scrolls to the center automatically. If you hold a certain point, the map keeps scrolling. Will appear at the upper right corner of the thumbnail of the movie or photo without location information. Notes Make sure that you set the GPS switch to ON prior to recording, to be able to create movies and photos that you can search for on the Map Index. The map always displays the north at the top. When you record several movies and photos at the same location, the movie or photo recorded most recently will be displayed on the LCD screen. tips You can also display the Map Index by touching (MENU) [ MAP] (under [PLAYBACK] category). You can also search for the thumbnail of the movie or photo you want to play by touching / in step 3. The recording location of the movie or photo will be displayed at the center of the map. Notes The map always displays the north at the top. Set the GPS switch to ON so that your camcorder can acquire the current location information. [. . . ] During playback, your camcorder can display the coordinates information recorded on movies and photos. A GPS receiver receives radio signals from the satellites, and calculates the current location of the receiver based on the orbital information (almanac data) and travel time of the signals, etc. determining a location is called "triangulating. " A GPS receiver can determine the location's latitude and longitude by receiving signals from 3 or more satellites. [. . . ]