User manual HUMAX CI-5100C

[. . . ] This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. MAINS SUPPLY OVERLOADING LIQUIDS CLEANING VENTILATION : 190 - 250 V AC 50/60 Hz : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. : The STB shall not be exposed to dripping or splashing and that no objects filled with liquids, such as base, shall be placed on the apparatus. [. . . ] Select a programme you want by using the buttons or buttons. Press the buttons to watch the programme of previous page or the programme of next page. Select a day you want using the buttons. To watch and reserve a programme you want, do the same steps with the Now/Next mode. Reserved mode Shows the programme lists that you have already reserved on the TV Guide or Information box. Maximum eight programmes can be reserved. this programme list includes service name , date , duration time , reservation mode and event name. To cancel the Reserved service, select a programme you want to cancel using the buttons and then press the White( )button. quick mode Shows a simple TV Guide like an Information box. This mode shows in the A/V playback mode. You can set a parental guidance rating to each programme in this mode. When the button is pressed after selecting the highlighted parental control on the initial menu screen, a display window for entering the PIN code will appear on the centre of screen. (If any problem occurs when entering a PIN code, you cannot switch to the next mode. The parental level is given as age-based numbers: no block, 6, 10, 14, 18 and total block. Enter the PIN code to unlock or lock programmes. Select the highlighted Old PIN code using the buttons and then enter your Old PIN code. â· Enter a New PIN code in the highlighted New PIN code using the buttons. When the entered PIN code is correct, then all settings are completed. (If the PIN code is wrong , the message "PIN code mismatch" will be displayed on the display window. When the button is pressed at this time, the Old PIN code is valid and the cursor is located in the first position of this menu. This mode allows you to customise, add a new service and displays the state of the STB. Enter the submenus after selecting the Installation mode in the Main Menu. [. . . ] Automatic Search Start Frequency In order to set the frequency range to seek, set the frequency which the automatic service serch starts from. End Frequency In order to set the frequency range to seek, set the frequency which the automatic service search ends to. The picture searches with varying Frequency, Symbol Rate and FEC etc. During the search, services that are found are displayed as follows: 1. [. . . ]