User manual HUMAX F1-CI

[. . . ] Digital Satellite Receiver User's Manual Common Interface Warning! Please do not insert metal or alien substance in hole for Module and Smart Card. In this case, it is possible that life span of STB is damaged. CONTENTS Safety STB Connection Remote Control Unit (RCU) Guide of Functions Guide of Main Menu System Setting Organising Channels Parental Control Status Channel Searching Common Interface 1 2 3 4 7 7 9 10 10 10 13 14 16 Specification Trouble Shooting Guide Safety This STB has been manufactured to satisfy the international safety standards. Please read the following recommended safety precautions carefully. MAINS SUPPLY : OVERLOADING : LIQUIDS : 190 ~ 260V AC 50/60Hz. [. . . ] Select the required channel using UP/DOWN or PgDn/PgUp keys and press OK key to select the required channel. 5 To download new software The software upgrade function allows the STB to be upgraded when new functions become available. Common Interface Module (CIM) and Smart Card You can enjoy not only scrambled channels using the CIM but also free channels by our STB. If you want to watch the pay TV programme, you must use the CIM. This STB is currently able to support four kinds of CIM( Viaccess, Nagravision, CONAX, CryptoWorks ). Common Interface Module and Smart Card is dependant on the service provider. Your required CIM is supplied by your service provider or distributor. Note : If you do not use the CIM, you can only watch the free TV programme. 6 Guide of Main Menu This section introduces the Main Menu structure of STB. It requires a Personal Identification Number( PIN ) code for Organising Channels, Parental Control and Automatic Search in order to protect the registered channels from someone else. The AUTO function in Channel Searching help to search programme channels. System Setting Language Setting Use to select the Menu and Audio language. Menu Language You are able to select the language for the menu and OSD( On-Screen Display ). It supports English, German, Italian and so on. Audio Language Some service providers broadcast with one or more alternative language soundtracks. You can select your preferred Audio language in this submenu. Time Setting Time Adjustment If your time zone is different from that of the service provider, you can adjust to your local time. It changes in steps of 30 minutes intervals. Wake up Time (Automatic switch on time) To set a wake up time, you can enter the 4 digits of hours and minutes using the 0 ~ 9 number keys. After setting, the STB is automatically turned on at the set time. If DISABLE is selected, the STB will not automatically turn on. 7 Sleep time (Automatic switch off time) To set a sleep time, you can enter the 4 digits of hours and minutes. After setting, the STB is automatically turned off at the set time. If DISABLE is selected, the STB will not automatically turn off. A/V Output Setting Used to configure the Audio/Video output parameters, including setting the type of A/V output on the SCART, RF and RCA connector. The Video output can be set for RGB, Composite video (CVBS) or S-VHS depending on the function of TV when you have connected to the SCART. You can select Stereo or Mono Audio output. If you have a widescreen TV, the aspect ratio setting in screen mode should be adjusted to 16:9 to allow the STB to automatically switch to widescreen format for a widescreen programme. Otherwise, set to 4:3 UHF Setting Used to select the UHF TV output settings, adjusting the UHF channel, the PAL sound mode and channel offset. [. . . ] Press OK then appears to Code Input Box. Select the required `Hex' Code by ARROW/OK keys. 12 SMATV Search Use to search for channels when using SMATV equipment. L-Band Frequency : Input a frequency of L-Band (950 ~ 2150 MHz). Symbol Rate : Input a symbol rate of signal. [. . . ]