User manual HUMAX FTV-5600

[. . . ] Safety This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. MAINS SUPPLY OVERLOADING LIQUIDS CLEANING VENTILATION : 190 - 250V AC 50/60Hz : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. : Do not expose the STB to rain or moisture. [. . . ] Sleep Time Depending on time setting, select the time when STB is turned off. Use the Numeric buttons(0~9) on the remote control unit to enter your Sleep Time. Use the buttons to select "Disabled". 17 OSD Setting Select the OSD transparency for information box and the display time. OSD Transparency Select the OSD transparent type. It affects Information Box, Service List and Setup menu. Use the buttons to 0%, 20%, 40%, 60%, 80% and 100%. Info. Box Display Time Set the display duration of Information Box displayed on the screen after changing services. The time ranges from 0 to 20 seconds. Parental Control You can set a parental guidance rating to each programme in this mode. When the button is pressed after selecting the highlighted parental control on the initial menu screen, a display window for entering the PIN Code will appear on the centre of screen. Enter the PIN Code " 0 0 0 0 " on the display window and press the button. (If any problem occurs when entering a PIN Code, you cannot switch to the next mode. ) 3. Set the parental guidance rating of highlighted censorship classification. The parental level is given as age-based numbers : no block, All block, 6, 10, 14 and 18. Enter the PIN Code to unlock or lock programmes. To change your PIN Code: · Enter a New PIN Code in the highlighted New PIN Code using the buttons. · To verify the New PIN Code, re-enter a New PIN Code in the highlighted Verify PIN Code and press the button. When the entered PIN Code is correct, then all settings are completed. 18 Guide of Main Menu AV Output Setting Video Output (CVBS/S-Video/RGB) Set the Video mode for the TV SCART output. Audio Output Set the Audio mode which is output from the TV SCART and RCA/Cinch Jack. (Stereo/Mono) Dolby Digital If Dolby Digital option is ON and the broadcaster provides the Dolby Digital stream, the Dolby Digital audio language is firstly selected when changing the service. Screen Mode Select the aspect ratio of TV which is connected to STB (4:3 or 16:9). Display Format Select the format which the video is to be displayed on screen. When your TV set is 4:3 and video source is 16:9, STB will display in Letter-Box or Centre mode as selected. [. . . ] Service Search Check the "Signal Strength" and the "Signal Quality" in the Signal Status menu. Check the LNB - replace LNB if necessary. Check the position of the dish - realign dish if necessary. DiSEqC 1. 0 Check that you have connected the LNBs to the correct connections on the switch. [. . . ]