User manual HUMAX IR-FOX C

[. . . ] Digital Cable Set-Top Box Digitale kabel set-top box The default Password is 0000. Het standaard wachtwoord is 0000. User's Manual /Gebruikershandleiding IR-FOX C Notice Thank you for purchasing a HUMAX product. Please read this user's manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user's manual next to your product for future reference. [. . . ] Select Edit Channels using the / button and press the OK or button. Select Channel Change Mode using the / button and press the OK or button. Select All Channels or Within the Current Channel List using the / button and press the OK button. When Within the current channel list is selected, you can only change the channel within the current channel list. To change the channel in another channel list in which the current channel list is not located, change the channel list or select All channels option. Note: GB32 User's Manual 6. Programme Guide The programme guide displays programme information about each channel, based on the date and time. You can also schedule your watching using the information given. Note: Press the GUIDE or EXIT button to exit the guide screen. 6. 1 Viewing Programme Guide Information You can view programme information for all channels. Move to previous/next programme within the same channel using the / button. Move to another channel using the / button. If there are multiple channels, use PAGE-/PAGE+ button to move to channels by page. Also, you can enter channel number you want using the NUMERIC(0-9) buttons on the remote control to move to the channel directly. Select a programme and press the OK button. You can watch the programme if it is on air or reserve it if it is the future programme. Press the i button in the selected programme to view the detailed information for the selected channel. 4. Viewing Guide Information by Channel List Groups You can view programme information of the selected channel list by groups. Press the RED button to display the channel list group. Select a channel list group using the / button. Move the cursor to the sub-group using the button, select a sub-group using the / button and then press the OK button. The programme guide for the selected channel list is displayed. User's Manual GB33 6. Viewing Programme Information Using Time Bar You can quickly search the time zone you want using the time bar. Press the GREEN button to display the time bar. [. . . ] Contact the product distributor if the problem persists. Contact the product distributor if the problem persists. Contact the product distributor if the problem persists. Service Unknown Service is currently not running Parental Control Lock No Event Information No Signal No Service available User's Manual GB57 14. Speci cation Tuner and Channel Input Connector Frequency Range Input Impedance Demodulation Mode FEC Mode Guard Intervals IEC-169-2 female (I-Type) 47MHz to 862MHz 75 -13 to +15 dBmV QAM 1. 5-7Ms/s 16-QAM, 32-QAM, 64-QAM, 128-QAM, 256-QAM MPEG-2 ISO/IEC 13818 Transport Stream Speci cation MPEG2 MP@ML Max 15MB 4:3, 16:9, 14:9 720 x 576 / 720 x 480 MPEG/MusiCam Layer I and II Single channel/Dual channel/Joint Stereo/Stereo 2MB 16MB 8MB SCART Video Output (CVBS, RGB, S-Video) SCART Volume and Mute Control (Resolution: 20 bits DAC, MAX, 2Vrms) Digital Audio Output, Fiber-Optic (Resolution: 20 bits) MPEG Transport Stream A/V Decoding Transport Stream Pro le Level Input Rate Aspect Ratio Video Resolution Audio Decoding Audio Mode Memory Flash Memory Graphic (MPEG) DRAM EEPROM A/V & Data In/Out Video Audio S/PDIF Power Supply Input Voltage Type Power Consumption Standby Power Protection 90~250 a. c. , 50/60Hz SMPS Max. [. . . ]