User manual HUMAX L3040

[. . . ] L3040 O W N E R ' S M A N U HUMAX USA, INC. Please contact us at: 866. Humax. USA (866. 486. 2987) Humax USA, Inc. 3601 West Garry Ave Santa Ana, CA 92704 www. humaxusa. com A L 2 Important Safety Instructions CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. [. . . ] The word TV will appear in the product indication window. Using the Using the buttons, select the PUNCH mode from among TV, VCR, DVD, and DEL. sign will appear and the PUNCH mode is saved. The process automatically returns to step 3. If you don't want to set another PUNCH mode, press the CANCEL button. When you press the buttons you have set to PUNCH mode, the product name will show along with the PUNCH icon in the product indication window. To stop the PUNCH setup process, press the CANCEL button. PUNCH PUNCH PUNCH PUNCH 22 Reset How to Reset the Remote Control Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). PUNCH The MBR icon will appear and blink. The word TV will appear in the product indication window. The - - - sign will appear in the product indication window. Input the reset code "975" and press the SEL button. The remote control will return to its initial state. 23 Basic operation Turning the LCD TV On and Off 1 2 3 Connect the Power Cord to the AC input on the back of your LCD TV. Insert the Plug for the LCD TV into a nearby electrical outlet. The standby indicator lights up on the front panel. Press the POWER ( ) button on the remote control. The LED lamp will change to light off and your LCD TV will be turned on. To switch your LCD TV off, press the POWER ( again. Indicator Lights Status Standby Mode Power On Power Saving Lamp Blue Light off Flickering ) button 4 Viewing the OSD Menu 1 With the power on, press the MENU ( ) button on the remote control. Use the Use the or or button to move the cursor on the OSD menu. ) button to select the sub-menu. 2 3 Use the SEL ( The OSD(On-Screen Display) disappears automatically after a few seconds without pressing other buttons or you can also press the MENU button to return to the previous menu or press the MENU button once or more to exit the OSD. 24 Basic operation Displaying Status Information 1 With the OSD, press the INFO button on the remote control. The LCD TV will display the external source, Picture Mode, Aspect Ratio, Clock and Video type. Selecting your Language When the LCD TV is initially powered ON, you must select the language in which to display all on-screen menus. 1 2 3 Press the MENU button. or Press the press the SEL ( button to select the OSD ( ) icon; then ) or button to select the Language. Select the appropriate language by pressing the button repeatedly. You can choose one of 9 languages. or After adjustment: Press the MENU button to exit. 25 Channel Setting up Channels Automatically Your LCD TV can memorize and store all of the available channels for both "TV(antenna) and cable channels. Therefore you must specify the type of signal source that is connected to the LCD TV. 1 2 3 4 Press the MENU button. Channel Channel Mode Auto Program LNA TV Pro Off Added 0 Press the or button to select the Channel ( ) icon; then press the SEL ( ) or button to select Channel Mode. Channel Memory Fine Tune Move Select Exit Press the or button to select the option ( TV or CATV ). Channel Channel Mode Auto Program TV Pro Off Added 0 Press the or button to select Auto Program; then press the SEL ( ) or button. [. . . ] 0~255 Refer to 1) 2) 3) Red gain Green gain Blue gain Miscellaneous display information mode infor off infor on on screen display mode menu off menu on ·Refer 1) Red, Green, Blue gains operate only RGB, DVI mode 2) + increase value ­ decrease value = change into input value ?return to previous value before change 3) rf = TV, vid=VIDEO, svd=S-VIDEO, rgb=COMPONENT1, yuv=COMPONENT2, vga=RGB, dvi=DVI 55 Troubleshooting ·Before you call a service technician, please review this list of problems and possible solutions. It may save you time and money. Problems No Power Possible Solution Make sure the power cord is connected to the AC outlet. Make sure the power cord is connected to a wall socket correctly. [. . . ]