User manual HUMAX LAU-26TPVR

[. . . ] LAU-26TPVR LCD Digital and Analogue TV Digital 2 Tuner PVR Built-in GB LCD Digital and Analogue TV Caution To reduce the risk of electric shock, do not remove cover(or back). Refer servicing to qualified service personnel. Indicates a situation which, if not avoided, could damage the equipment or other apparatus. This symbol indicates dangerous voltage inside the LCD-TV that presents a risk of electric shock or personal injury. [. . . ] Select Delete and press the OK button to delete the editing. Select Cancel and press the OK button to cancel the editing. In Recording Schedule, you can move easily to the Recorded Programmes or HDD Control using the RED or GREEN buttons on the remote control. 33. Recording Recording Editing Recording Reservations 1. Select Recording using the / button, and press the OK or / button. Select Recording Schedule using the button, and press the OK or / button, 4. Select a reserved item which you want to edit using the and press the OK button. 5. The next editing procedure is the same as Adding recording reservations. When the reserved start time comes, the following message will be displayed on the screen ; If you select Yes and press OK button, the recording of the reserved programme is started. Note : _ If the reserved start time comes in the standby mode, no sooner have you turn on the LCD-TV than the confirm message will be displayed on the screen. _ If the programme to reserve overlaps with the existing one, adjust the reservation so as not to overlap. _ If you want to stop on recording, press the STOP ( ) button. _ When you are recording the channel which is watching currently, the subtitle is recorded according to subtitle-setting in start of recording. When you are recording the channel which is not watching currently, the subtitle is recorded according to subtitle-setting in Menu (DTV SETUP - Preferences - Local Setting - Subtitle Language/Display). 34. Recording Recording Time Shifted Recording This LCD-TV automatically saves the programme on air in the installed hard disk drive temporarily, so that users can watch programmes as they watch a video tape using functions such as rewind, fast forward, instant replay and pause. 1. On watching TV, press the TSR on the remote control until when Time Shift On message appears, and the time shifted recording will be started. _ If you press the TSR button on watching TV, the current state of time shifted recording will be displayed with a message (Time Shift On or Time Shift Off). If you press it once again, the message will be changed to the other state. _ On the channel during time shifted recording, if you press the OK button, TSR On message is shown. Note : If you press the PLAY/PAUSE ( ) button on the Time Shift Off state, it will be switched to the Time Shift On automatically and start the time shifted recording. During time shifted recording, you can press the various playback buttons such as PLAY/PAUSE ( ), FORWARD ( ), REWIND ( ) or INSTANT REPLAY ( ) to playback the recording data saved temporarily in TSR buffer of the programme you are watching. Note : _ You cannot perform Repeat A-B ( ) or Bookmark ( , ) function during time shifted recording. _ If you want to playback the programme which is viewing-restricted or locked, will need the password. If you press a playback button, the TSR time bar will be displayed as following and the data will be played according to each playback function. [. . . ] + Check the brightness setting of the display. + Check the cable from the VIDEO INPUT terminal. + Make sure headphones are not connected. + Check the setting of AV OUTPUT terminal. [. . . ]