User manual HUMAX LGB-17DTT

[. . . ] LGB-17DTT LCD Digital and Analogue TV LCD Digital and Analogue TV Caution To reduce the risk of electric shock, do not remove cover(or back). Refer servicing to qualified service personnel. Indicates a situation which, if not avoided, could damage the equipment or other apparatus. This symbol indicates dangerous voltage inside the LCD-TV that presents a risk of electric shock or personal injury. [. . . ] Basic Operation 2. Basic Operation 6. Next programme Information : displayed if next programme information is provided. Press the button to display the next programme information. Note : If there is no available programme information, programme information is not displayed. 2. Detailed Programme Information You can see detailed information about the current programme. Press the INFO ( ) button. Note : _ Press the INFO ( ) button again to hide the information box. / _ If the detailed programme information is more than one page, use button to move to the previous or next page. 2. 5 MHEG Application The MHEG application makes possible not only access to the Internet and exchange e-mail through TV but also put the receiver directly into conventional television state. 1. ) button or the key which the data programme help you ) or 2. Select your desired application using the button, and press the OK ( button. Note : Please refer to the detailed information of each MHEG application if you operate the MHEG application. 31. DTV - Channel List 3. 1 Displaying and Switching Channel List You can display channel list using LIST ( on the channel list. 1. Press the LIST ( ) button while watching a channel to display the channel list. Select your desired channel using the / button and press the OK ( button to change the channel. ) ) button and switch to other channels 3. Enter the channel number directly using NUMERICAL (0~9) button to move cursor onto your desired channel. And then press the OK ( ) button to change to the selected channel. Note: _ Within the channel list, press the PAGE ( / ) buttons to move on page-by-page basis. _ Whenever you press the DTV CH ( ) or RADIO CH ( ) button while the channel list is displayed, the channel list will be switched between the TV and Radio channel list. 3. 2 Editing Channels You can edit all channels or each channel by channel list group. 1. Select Edit Channels using the button, and press the OK ( button. 3. Select Edit Channel Lists using the / button, and press the OK ( ) or button. You will be prompted to enter your password. Enter your password using NUMERICAL (0~9) buttons. Note : _ Press the BACK ( ) or button to save the changes and return to the previous menu, press the EXIT ( ) button to exit the menu screen. [. . . ] + Make sure the antenna is facing the right direction. + The signal may be reflected from mountains or buildings. + There may be interference from cars, trains, high voltage lines, neon lights, etc. + There may be interference between the aerial cable and power cable. [. . . ]