User manual HUMAX LGB-19DZT

[. . . ] Indicates a hazardous situation which, if not avoided, could result in serious injury. This symbol indicates important instructions accompanying the LCD-TV. Read this manual carefully and make sure you understand the instructions provided. For your safety, check what the result of each action will be. Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations. [. . . ] Press the (Mode) button again to switch into the list save mode. The list is displayed with the coloured blocks. Press the coloured button corresponding with the block to change into the current page. R G Y B 4. To save the current teletext page completely, Press the OK button. 30. Teletext Feature Digital TV Channel Setup When you purchase your LCD-TV, you can run the Automatic Search. It immediately performs Channel Search. (You can also run the digital TV channel setup in Default Setting. ) 1. Starts the Automatic Search immediately. Please wait for finishing the Channel Search. If you want to stop the Channel Search, select the OK button. If the Channel Search is stopped or finished, press the OK button to save the result of the channel search. Once the channel search has finished, you can enjoy digital television. Warning : If you exit the Automatic Search without fully completing the channel searching procedure, you may not have any digital TV channels stored. Note : If there is no available programme information, programme information is not displayed. 33. Basic Operation Basic Operation Detailed Programme Information You can see detailed information about the current programme. Press the INFO button. Note : _ Press the INFO button again to hide the information box. _ If the detailed programme information is more than one page, use / button to move to the previous or next page. Icons Represents the recommended minimum age for the current programme. Displayed only when the channel is a locked channel. Displayed only when the channel is a scrambled channel. Displayed only when subtitle information is available. Displayed only when there is any teletext information. Displayed only when the programme is broadcast in Dolby Digital. MHEG Application The MHEG application makes possible not only access to the Internet and exchange e-mail through TV but also put the receiver directly into conventional television state. 1. Press the TEXT button or the key which the data programme help you to press. Select your desired application using the button, and press the OK or button. [. . . ] No picture / No picture from AV terminal. Picture is displayed, But no sound from the Speakers. Check item + Insert the AC power cord plug securely in AC power outlet. + Make sure the remote control is not in the standby mode (The POWER/Standby indicator is Orange colour. ) + Check the brightness setting of the display. [. . . ]