User manual HUMAX LGB-26TPVR

[. . . ] LGB-26TPVR LCD Digital and Analogue TV Digital 2 Tuner PVR Built-in GB LCD Digital and Analogue TV Caution To reduce the risk of electric shock, do not remove cover(or back). Refer servicing to qualified service personnel. Indicates a situation which, if not avoided, could damage the equipment or other apparatus. This symbol indicates dangerous voltage inside the LCD-TV that presents a risk of electric shock or personal injury. [. . . ] During time shifted recording, you can press the various playback buttons such as PLAY/PAUSE ( ), FORWARD ( ), REWIND ( ) or INSTANT REPLAY ( ) to playback the recording data saved temporarily in TSR buffer of the programme you are watching. Note : _ You cannot perform Repeat A-B ( ) or Bookmark ( , ) function during time shifted recording. _ If you want to playback the programme which is viewing-restricted or locked, will need the password. If you press a playback button, the TSR time bar will be displayed as following and the data will be played according to each playback function. For more information of the playback buttons, refer to Playback Control. TSR Time Bar TSR time bar displays the current operation status for playback of TSR data. 1 2 3 4 5 6 7 8 Start time of TSR time bar Watching point Live or broadcasting point Total amount of programme saved to TSR buffer (max 30 minutes) End time of TSR time bar Play status (The speed is shown in playing of fast-forward, fast-rewind, slow-forward, slow-rewind. ) 7. Current time (The time of live or broadcasting point) When the play status is PLAY or LIVE on TSR time bar, if you take no action for about 3 seconds, TSR time bar will be minimized and displayed on the lower right-hand side of the screen. If you press the STOP ( ) button, the TSR time bar will disappear and the playback will be stopped. To stop the time shifted recording, press the TSR button until when Time Shift Off message appears. Note : _ It is possible that you may not record the scrambled programme or data programme normally. _ During the TSR playback or Programme Playback, the TruSurround XT and Auto Volume Level menus are disabled. 36 . Recording Playback Programme Playback You can watch the recorded programme by selecting a desired programme in the Menu - Recording - Recorded Programmes and pressing the OK or PLAY/PAUSE ( ) button. 1. Select Recording using the / button, and press the OK or / button. 3. Select Recorded Programmes using the OK or button, and press the button to display the recorded programme list. Select a desired programme to playback using the press the OK or PLAY/PAUSE ( ) button to playback the programme. 5. Time bar appears as following and starts playback of the selected programme instantly. Time Bar Time bar displays the current operation status. 1 2 3 4 5 6 7 8 9 1. Play status (The speed is shown in playing of fast-forward, fast-rewind, slow-forward, slow-rewind. ) 7. Input source mode of the recorded programme (Digital, Analog, AV1/2/3/4, S-Video) 8. Programme name When the play status is PLAY on Time bar, if you take no action for about 3 seconds, Time bar will be minimized and displayed on the lower right-hand side of the screen. You can perform trick play functions like VCR functions such as rewind, forward, slow motion, pause, skip, and replay using the playback control or the additional buttons on the remote control during playback a programme. 37. Playback currently on recording. _ During the TSR playback or Programme Playback, the TruSurround XT and Auto Volume Level menus are disabled. 38. Playback Editing Recorded Programmes Select Menu - Recording - Recorded Programmes, and then select the desired recorded programme to edit the information of the programme. Editing Title You can edit the title of a recorded programme. 1. Select your desired programme in the list using the button. 2. Select Edit Title using the / button, and press the OK button to display a keyboard on the screen. Enter the desired programme title on the screen keyboard using the / / / button. [. . . ] + Check the brightness setting of the display. + Check the cable from the VIDEO INPUT terminal. + Make sure headphones are not connected. + Check the setting of AV OUTPUT terminal. [. . . ]