User manual HUMAX NA-4710T

[. . . ] Contents Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB2 Copyright & Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB3 Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB4 STB Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Set the parental guidance rating of highlighted censorship classification. The parental level is given as age-based numbers : no block, 6, 10, 14, 18 and total block. Enter the PIN code to unlock or lock programmes. To change your PIN code: · Select the highlighted Old PIN code using the buttons and then enter your Old PIN code. · Enter a New PIN code in the highlighted New PIN code using the buttons. · To verify the New PIN code, re-enter a New PIN code in the highlighted Verify Changed PIN code. When the entered PIN code is correct, then all settings are completed. (If the PIN code is wrong, the message "PIN code mismatch" will be displayed on the display window. When the button is pressed at this time, the Old PIN code is valid and the cursor is located in the first position of this menu. ) GB19 4. Installation This mode allows you to customise, add a new service and displays the state of the STB. Enter the submenus after selecting the Installation mode in the Main Menu. 4-1. System Setting The System Setting mode supports the STB internal settings according to the connection of the receiver and external units. This mode includes Language Setting, Time Setting, A/V Output Setting, UHF Tuning and Other Settings. Language Setting Select the language for menu, audio or subtitle. Select the highlighted language setting using the buttons in the system setting mode and then press the button. Select the highlighted Menu(or Audio, Subtitle) Language and press the buttons and the language list will be displayed. Use the buttons to move to a language you want and then press the button to finish setting. Menu Language Select a language for the menu or banner OSD in this mode. You can choose the language from a selection of English and German. When a broadcasting information (event) is transmitted, the selected Menu Language will be applied. Audio Language Select the default language for audio when changing services. If you change the current service, your STB will initially select the previously memorised Audio Language. [. . . ] If the network operator does not transmit proper information in the default channel, STB can not search all services. It is required to search for all channels manually. Automatic Search The menu "Automatic Search" is the easiest method to store new stations. Proceed as follows in order to start the Automatic Search: Start Channel Set the lowest channel in your area by using the Press the button to start the search. End Channel Enter the highest channel by using the Press the button to start the search. [. . . ]