User manual HUMAX PR-HD1100

[. . . ] Vorwort ** Sehr geehrte Kundin, sehr geehrter Kunde, herzlichen Dank, dass Sie sich für den HDTV-Receiver PR-HD1000 entschieden haben. Die vorliegende Bedienungsanleitung wird Ihnen helfen, die umfangreichen und faszinierenden Funktionen Ihres neuen Receivers optimal zu nutzen. ** Mit Ihrem HDTV-Receiver PR-HD1000 steht Ihnen die ganze Welt des Fernsehens offen ­ und das in Top-Qualität. Sie sind bestens für die Fernsehzukunft gerüstet!HDTV ist Fernsehen in einer neuen Dimension - glasklare, gestochen scharfe Bilder und brillante Farben. [. . . ] Select On/Off using the OK or button and press the BACK button to set the value. GB 48 ** 8. 8 Startup-Channel You can assign a certain channel to be displayed when the product is turned on. button and press the OK button and press the 2. Select Startup-Channel using the OK button. 1. Setting the Startup-Channel You can choose to assign a certain channel to be displayed when powering on. Setting the Startup-Channel using the button. Select one option from On/Off using the OK On Off or button. The assigned channel will be displayed when powering on. The last channel you have watched will be displayed when powering on. 2. Startup-Channel You can assign a preferred channel as the start channel. Select Startup-Channel using the button. 2. Select one option from 100 or User preference using the OK or button. When you have selected User preference, enter the channel number using the NUMERIC(0-9) buttons and press the OK button. ** Note: When Off is selected, Start Channel Number is inactivated. You can switch to TV/radio by pressing the TV/RADIO button on the remote control. GB 49 9. Preferences ** In this chapter you can set parental control, language setting, time setting, A/V control and other configuration items to keep limitations where you want them for the viewers. ** Note: Press the BACK button to save the changes and return to the previous menu. Press the MENU button to exit the menu screen. 9. 1 Parental Control Parental Control allows you to set rating limits for each programme according to the age of the viewer or change your previous password. You can also lock the changes you have made by operating installation lock. button and press the OK button and press the 2. Select Parental Control using the OK button. 4. You will be prompted to enter a password. Enter the password using the NUMERIC(0-9) buttons. ** Note: The default password is 0000. 1. Censorship Classification Censorship Classification enables you to place certain restrictions on the viewers by setting age limits and require a password to view the blocked programmes. Select the Censorship Classification using the 2. Select the Age Level you wish to set using the OK button. [. . . ] Remove the alien substance and contact local service center in case damaged has occurred. Short LNB LNB cable is short. LNB In Port is inserted by alien substance or damaged. GB 84 15. Specification ** Tuner & Channel Input Connector Frequency Range Signal Level LNB Power & Polarisation F-Type, IEC 169-24, Female 950MHz to 2150MHz -25 to 75dBm Vertical: +13. 5V (+14. 5V at high voltage) Horizontal: +18V (+18. 5V at high voltage) Current: Max. 500mA (Overload protection) 22KHz Tone Frequency: 22 ± 4KHz Amplitude: 0. 7 ± 0. 2V DiSEqC Control Demodulation Input Symbol Rate Version 1. 0, 1. 2, USALS compatible QPSK, 8PSK DVB-S : 2­45 Ms/s DVB-S2 : 10-30 Ms/s (QPSK), 10-31 Ms/s (8PSK) FEC mode DVB-S : Auto, 1/2, 2/3, 3/4, 5/6, 7/8 DVB-S2 : Auto, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 (QPSK) Auto, 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 (8PSK) MPEG Transport Stream A/V Decoding Transport Stream MPEG-2 ISO/IEC 13818 Transport Stream Specification Profile Level Input Rate Aspect Ratio Video Resolution Audio Decoding Audio Mode MPEG2 MP@ML 15 MB/s Max 4:3, 16:9 Letter Box 720x576, 1920x1080i, 1280x720P MPEG/MusiCam Layer I & II Single channel/Dual channel/Joint Stereo/Stereo Memory Flash Memory Graphic(MPEG) & System DRAM EEPROM 4 MB 64MB + 32MB 8KB GB 85 15. [. . . ]