User manual HUMAX VACI-5350

[. . . ] VACI-5350 Digital Set-Top Box for Viaccess Embedded & Common Interface Standard Contents Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Copyright & Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ~ 4 STB Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It affects Information Box, Service List and Setup menu. Use the buttons to 0%, 25%, 50%, 75% and 100%. Info. Box Display Time Set the display duration of Information Box displayed on the screen after changing services. The time ranges from 0 to 20 seconds. Parental Control You can set a parental guidance rating to each programme in this mode. When the button is pressed after selecting the highlighted parental control mode on the initial menu screen, a display window for entering the PIN Code will appear on the centre of screen. Enter the PIN Code " 0 0 0 0 " on the display window and press the button. The manufacturer default PIN Code is 0 0 0 0 . (If any problem occurs when entering a PIN Code, you cannot switch to the next mode. ) 3. Set the parental guidance rating of highlighted Censorship. The parental level is given as age-based numbers : No block, All block, 6, 10, 14 and 18. Enter the PIN Code to unlock or lock programmes. To change your PIN Code: · Enter a New PIN Code in the highlighted New PIN Code using the buttons. · To verify the New PIN Code, re-enter a New PIN Code in the highlighted Verify PIN Code and press the button. When the entered PIN Code is correct, then all settings are completed. 15 AV Output Setting Video Output (CVBS/S-Video/RGB) Set the Video mode for the TV SCART output. Audio Output Set the Audio mode which is output from the TV SCART and RCA/Cinch Jack. (Stereo/Mono) Dolby Digital If Dolby Digital option is ON and the broadcaster provides the Dolby Digital stream, the Dolby Digital audio language is firstly selected when changing the service. Screen Mode Select the aspect ratio of TV which is connected to STB (4:3 or 16:9). Display Format Select the format which the video is to be displayed on screen. When your TV set is 4:3 and video source is 16:9, STB will display in Letter-Box or Centre mode as selected. When your TV set is 16:9 and video source is 4:3, STB will display in the Pillar-Box or Full mode as selected. UHF Tuning You select the STB output by using the UHF channel. The range of channels and frequency value are different for each PAL standard: PAL I/G for Europe : CH21 ~ CH69 PAL Select a PAL I or PAL G according to the above range of channels. [. . . ] Check the LNB - replace LNB if necessary. Check the position of the dish - realign dish if necessary. DiSEqC 1. 0 Check that you have connected the LNBs to the correct connections on the switch. Check that you have set the correct settings in the Antenna Setting menu. [. . . ]