User manual HUMMINBIRD 958C COMBO QUICK GUIDE

[. . . ] When the title screen is displayed, press the MENU key and then select Simulator. 798c SI Chart View with Navionics® Cartography Select a Chart (chart-capable models only) Humminbird® Combo models include a built-in map. There are also some Humminbird® models that are compatible with Navionics® and/or LakeMaster® chart cards. Open the Main Menu and select Chart tab > Chart Select or Navigation tab > Chart Select. NVB units, select Chart tab > NVB Chart Preference. [. . . ] This menu type might also open a submenu. The right arrow indicates to press the RIGHT Cursor key. Close: Press the EXIT key. Views Change the Active View Scroll Forward: Press the VIEW key to advance to the next view in the View Rotation. Press the VIEW key repeatedly to see all the views in the rotation and until the view you want to use is displayed on the screen. Scroll Backward: Press the EXIT key (repeatedly) to browse through the View Rotation in reverse order. Customize: You can choose which views are hidden or visible in the View Rotation. Select the Views tab from the Main Menu. If your control head does not include a Views tab, select Setup tab > Views. Select a view name and choose Hidden or Visible. Also, see Key Functions: View Preset Keys. Customize the Digital Readouts Change Digital Readouts Each view displays digital readout information (such as speed or time), which will vary with the selected view, attached accessories, and navigation mode. Select the Setup tab from the Main Menu. Choose Select Readouts, and then press the RIGHT Cursor key. NOTE: If the Select Readouts menu option does not appear under the Setup tab, change the User Mode to Advanced (see Menus). Digital Readouts 3. Press the RIGHT or LEFT Cursor key to scroll through the available readouts. To hide the data window, select Off. 998c SI Sonar/Chart Combo View Select an Active Side In the 800, 900, and 1100 SeriesTM, you can apply menu settings to each side of a Combo View. The green arrow on the view points to the active side. Press the MENU key once in a Combo View and select Active Side from the X-PressTM Menu. The Green Arrow indicates the right side of the view is the selected or active side. 2. Select Right or Left to choose an active side. Key presses and menu selections will be applied to the active side of the view. Key Functions POWER/LIGHT Key: Press the POWER/LIGHT key to Power On. Press + Hold the POWER/LIGHT key to Power Off. During operation, press the POWER/LIGHT key to open the Backlight & Background Color menu setting (color models) or the Backlight & Contrast menu setting (monochrome models). ZOOM Keys: Press the +/- ZOOM keys to adjust the zoom range in Sonar Zoom View or change the scale of the Chart views to appear closer or farther away. In Side Imaging View, move the active cursor to a location, and then press the +ZOOM key to magnify your selection. [. . . ] Without an active cursor, press the GOTO key, and choose a waypoint from the saved waypoints list. Man Overboard (MOB): Press + Hold the GOTO key (700, 800, 900, and 1100 SeriesTM only). EXIT Key: Press the EXIT key to close a menu, exit cursor mode, or turn off an alarm. Also, press the EXIT key to scroll through the View Rotation in reverse order (see Views). [. . . ]