User manual HUMMINBIRD 967C

[. . . ] Thank You! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. [. . . ] Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Lower Range setting. (AUTO, 10 to 1000 feet; 3 to 330 meters [International models only], Default = AUTO) Chart Speed Chart Speed determines the speed at which the sonar information moves across the display, and consequently the amount of detail shown. A faster speed shows more information in the Sonar Views and is preferred by most anglers; however, the sonar information moves across the display quickly. A slower speed keeps the information on the display longer, but the bottom and fish details become compressed and may be difficult to interpret. Regardless of the Chart Speed setting, the RTS® Window will update at the maximum rate possible for the depth conditions. Adjust Chart Speed to your personal preference. Highlight Chart Speed on the 2D Sonar X-PressTM Menu. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Chart Speed setting. (1-10, where 1 = Slowest, 10 = Fastest, Default = 5) To turn on Bottom Lock: 1. In the 2D Zoom View, highlight Bottom Lock on the 2D Sonar X-PressTM Menu. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Bottom Lock setting to on. (Off, On, Default = Off). Bottom Range (2D Zoom View only, when Bottom Lock is On) Bottom Range allows you to control how much of the water column, measured up from the bottom, is shown in the 2D Zoom View. Choose a small value to see low-lying bottom structure or details of the bottom return. Choose a larger value to see large structure in deeper water. It is possible to set the Bottom Range to be greater than the depth. In this case, you may see surface clutter in a wavy band that mirrors changes in the depth. In the 2D Zoom View, highlight Bottom Lock on the 2D Sonar X-PressTM Menu. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Bottom Lock setting to on. Once you turn on Bottom Lock, the Bottom Range X-PressTM menu choice will be displayed. (10 - 60 feet or 3-20 meters [International Models only], Default = 15 feet) Bottom Lock (2D Zoom View only) Bottom Lock changes the mode of the Zoomed view in the 2D Zoom View. Bottom Lock continuously graphs the bottom at a constant point on the display regardless of changes in depth. This "flattens" out the bottom contour, but is effective at showing fish on or near the bottom. 66 2D/3D Priority 2D/3D Priority allows you to change the way the 6 beams on the transducer are used in order to prioritize and customize the 2D and 3D display of information. [. . . ] Tracks can also be permanently saved to memory, and re-displayed at the user's option. Track Line (TRK): The Track Line is the desired line of travel between two waypoints, and represents the most efficient path between the two points because it is a straight line. 321°, where 000° is North, 090° East, 180° is South, 270° is West). See Cross Track Error and Course Over Ground. GPS & Navigation Terms Trackplotter: Trackplotter describes a navigation device that shows Present Position, along with Track, Waypoint, and Routes, but NO MAP in the background. [. . . ]