User manual HUMMINBIRD LCR4 ID

[. . . ] TABLE OF CONTENTS INSTALLATION PREPARATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parts Supplied. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] zoom each dot represents 21/2 inches, on the 30 ft. zoom each dot is 5 inches and on the 60 ft. What Zoom Does The zoom feature on the LCR will allow you to look at underwater readings in very fine detail, and with the LCR's Total Screen Update you have the capability to zoom in on bottom, fish and structure, even after you have gone over the area. How To Use Zoom First position the Zoom Region (See Figure 17) next to the area that you want to expand by pressing the Range up or down button. Next, by pressing the Zoom button the zoom will be activated. You will notice that the USING THE LCR OPERATIONAL INSTRUCTIONS word Zoom appears in the lower part of the display, indicating that the Zoom is on. You will also notice that the entire screen has been changed to show an expanded view of the area from the top of the Zoom Range to the bottom of the Zoom Range. The LCR'S Total Screen Update feature allows you to zoom in on an area even after you have passed over it. Figure 17 shows two screens, one with Zoom off and one after turning Zoom on. The zoom may be activated at any time (during normal transmitting and receiving or stop action), but while learning to use the Zoom feature you might find it easiest to first press the Stop/Resume button to freeze the display. Now you can position the Zoom Range, activate the Zoom, and study the display. By pressing the Zoom On/Off button again you can go back to the un-expanded or normal display. Going back and forth several times will help you in understanding exactly what you are seeing with the Zoom activated. Some Additional Things You Should Know About Zoom A. While the Zoom is turned on you can move the Zoom Range up and down. This will allow you to search or look at an entire area in fine detail. The Zoom Range indication at the right of the display can be used for depth reference. For example in Figure 17 the Zoom Range is set between 33 feet and 46 feet. This means that when the Zoom is activated that you are looking at an expanded view of the area from 33 feet to 48 feet. Remember that because of the LCR's Total Screen Update feature the information to the maximum depth is always being recorded in memory. This means that even while you are using Zoom, no information is being lost. You can turn Zoom off, go to any depth scale and see all the information just as if you had been on that depth scale all along Bottom Lock: Your LCR has a very unique bottom lock feature. To activate bottom lock, hold down the zoom on/off button for 1 to 2 seconds. [. . . ] Accessories not manufactured under the Humminbird trade name are not covered by our warranty. The customer is responsible for shipping charges to Humminbird. Humminbird will provide ground UPS or Parcel Post shipping back to the customer free of charge. This warranty applies to the original purchaser only. [. . . ]