Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HUMMINBIRD STH 7W. We hope that this HUMMINBIRD STH 7W user guide will be useful to you.
Lastmanuals help download the user guide HUMMINBIRD STH 7W.
Detailed instructions for use are in the User's Guide.
[. . . ] We encourage you to read these instructions thoroughly to fully benefit from your Humminbird® accessory. This accessory requires drilling a hole in the hull of the boat; therefore, installation should be performed by a qualified marine technician. Prior to installation, test the transducer to ensure that no damage occurred during shipping. [. . . ] If you are mounting the transducer body directly to the hull, drill the hole perpendicular to the hull. Thoroughly clean and deburr the drilled hole and clean the outside of the hull. If you are using a fairing block, the block should be cut to match the angle of the deadrise of the hull. The first piece mounts outside the hull and is shaped to match the profile of the transducer. The second piece mounts inside the hull
2
Bronze Thru-Hull Transducer
and provides a level surface for the fasteners. A fairing block (usually made of wood) can also serve to create a hydrodynamic water flow around the transducer body. A fairing block is required for round body transducers. The design and fabrication of this block varies greatly with different hull shapes; therefore, it should be customized by a qualified marine technician. If the transducer is round, a notch on the housing and stem indicates the forward side of the transducer. This type of transducer is directional in nature and must be aligned with with the front of the boat (the direction of travel). Failure to align the transducer notches with the front of the boat will result in incorrect bottom readings. Temporarily install the transducer to check the fit. Then apply a generous amount of marine sealant or slow curing epoxy inside the drilled hole and along the mating surfaces of the transducer housing. If you are using a fairing block, seal the mating edges of the block as well. [. . . ] Your fishfinder is now ready for operation.
Customer Support
Your Humminbird® accessory is designed for trouble-free operation and is backed by the same one-year warranty as our fishfinders, VHF Marine-Band radios, and GPS Navigation equipment. Refer to your Humminbird® product Operations Manual for the specific details of this warranty. If you have any questions, call our Humminbird® Customer Resource Center at 1-800-633-1468. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUMMINBIRD STH 7W
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HUMMINBIRD STH 7W will begin.
