User manual HUMMINBIRD TROLLING MOTOR MOUNTED TRANSDUCED INSTALLATION

[. . . ] This applies only to Humminbird® products returned to our factory in Eufaula, Alabama. This Service Policy is subject to change without notice. DOMESTIC (USA) CUSTOMERS: PLEASE DO NOT RETURN THIS PRODUCT TO STORE FOR SERVICE For all technical issues please call 1-800-633-1468 Or visit www. humminbird. com, click SUPPORT Please reference product serial number and model number when contacting Humminbird®. 530503-5_B 1 Trolling Motor Mounted Transducer with Mount Assembly Thank You Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Genuine Humminbird® accessories offer the opportunity to upgrade and expand the capabilities of your Humminbird® product. NOTE: Your transducer may not look exactly like the transducer shown in the illustrations, but it will mount in exactly the same way. 530503-5_B For OUT-OF-WARRANTY service, complete the following steps: · Obtain a Repair Authorization Number from the Humminbird® Customer Resource Center. [. . . ] Instead, it must be separately collected, treated and recycled. For proper disposal of this equipment, please contact the Johnson Outdoors distributor or see www. humminbird. com. © 2008 Humminbird®, Eufaula AL, USA. All rights reserved. Installation Overview Following are instructions for the installation of this accessory. Before you start installation, we encourage you to read these instructions carefully in order to get the full benefit from your Humminbird® accessory. If you find that any items are missing from your installation kit, call our Customer Resource Center at 1-800-633-1468 or visit our website at www. humminbird. com. In addition to the hardware supplied with your transducer, you will need various hand tools. Installation The trolling motor transducer is designed to mount on the trolling motor of your boat. All hardware needed for installation and operation of this Humminbird® accessory is either included with this accessory or came with your original transducer. The trolling motor mounted transducer allows you to gather sonar information from the point on the boat closest to where you are fishing. It is important that you properly orient the transducer housing in the direction of travel of the trolling motor, to ensure an accurate depiction of the terrain under your boat. The trolling motor mounted transducer will fit any standard trolling motor housing. Some users install this transducer in conjunction with a switch so that the standard transducer can be used for high-speed operation, and the trolling motor transducer can be used while trolling. Assembling the Metal Mounting Bracket Returning Your Unit for Service Before sending your unit in for repair, please contact the factory, either by phone or by email, to obtain a Repair Authorization Number for your unit. NOTE: Please do not return your Humminbird® to the store for service. Please have your product model name and serial number available before calling the factory. If you contact the factory by e-mail, please include your product model name and serial number in the e-mail, and use Request for Repair Authorization Number for your e-mail subject header. You should include your Repair Authorization Number in all subsequent communications about your unit. For IN-WARRANTY service, complete the following steps: · Obtain a Repair Authorization Number from the Humminbird® Customer Resource Center. · Tag product with your name, street address, phone number and your assigned Repair Authorization Number. · Include a brief written description of the problem. · Include a copy of your receipt (to show proof and date of purchase). · Return product freight prepaid to Humminbird®, using an insured carrier with delivery confirmation. 1. Attaching the Transducer WARNING: Before attaching the transducer to the trolling motor, make certain that the motor is disconnected from all sources of electrical power. CAUTION: Before attaching the transducer to the trolling motor, make sure that the trolling motor is properly secured to the boat and will not shift during transducer installation. Assembling the Metal Mounting Bracket 1. Attach the transducer to the bracket using the hardware provided and refer to the illustration that matches your transducer type. NOTE: If you purchased the AD-STM or AD XTM 9 accessory, you will need to use the hardware that originally came with the transducer to attach the transducer to the bracket. Mounting Bracket should be parallel to the Transducer Side View of the Transducer © 2008 Humminbird®, Eufaula AL, USA. [. . . ] For assistance, contact the Customer Resource Center at www. humminbird. com or call 1-800-633-1468 for more information. 2. Route the transducer cable around the side of the motor housing and secure it to the motor shaft using the plastic cable ties provided. NOTE: As you route the cable from the trolling motor to the boat, be sure to leave sufficient slack in the cable to allow for full movement and retraction of the trolling motor during normal operation. Assembling the AD XTM9 Maintenance If your boat remains in the water for long periods of time, algae and other marine growth can reduce the effectiveness of the transducer. Periodically clean the face of the transducer with hot water. If your boat remains out of the water for a long period of time, it may take some time to wet the transducer after it is returned to the water. [. . . ]