User manual HUMMINBIRD VHF55S

[. . . ] 5314 60 -1_A THANK YOU! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge during the first three years after purchase, and available at a reasonable rate after the three-year warranty period expires for the radio, and free of charge during the first year after purchase for the Ni-MH battery pack. [. . . ] The Stored and M icons will appear on the LCD to indicate that you are in Memory mode. Use the Up or Down Channel keys to scan through the saved channels. Press the MEM key again to regain access to all channels. 13. Using the Watch Monitor Modes The Humminbird® VHF55S is equipped with two types of monitor modes: Dual Watch and Tri Watch. Dual Watch monitors the current working channel and Channel 16 alternately. To activate and terminate Dual Watch mode: 1. Press and release the DUAL/TRI Watch key to activate the Dual Watch mode. Press and release the DUAL/TRI Watch key again to terminate Dual Watch mode and return to the previous working channel. Press and hold the DUAL/TRI Watch key for 3 seconds to terminate Dual Watch mode and enter into Tri Watch mode. The TRI icon will appear on the LCD. NOTE: During Dual Watch mode, the SCAN, MEM, WX/BAND, and the Up and Down Channel keys are inactive and will sound an error beep if pressed. Tri Watch monitors Channel 16, Channel 9 and the current working channel. 15 To activate and terminate Tri Watch mode: 1. Press and hold the DUAL/TRI Watch key for 3 seconds to activate the Tri Watch mode. Press and hold the DUAL/TRI Watch key again for 3 seconds to terminate Tri Watch Mode and to return to the previous working channel. Press and release the DUAL/TRI Watch key to terminate Tri Watch mode and enter into Dual Watch mode. The DU icon will apear on the LCD. NOTE: During Tri Watch mode, the SCAN, MEM, WX/BAND and Up or Down Channel keys are inactive and will sound an error beep if pressed. 14. Resetting the Radio You can reset many radio settings back to the factory default settings. Resetting the radio will: · Erase any channels stored in memory. channels, if another mode is currently selected at the time of reset. · Turn Off the Weather Alert setting, if it is currently active. · Return power settings to their original state. To reset the radio: 1. Turn the radio Off by rotating the PWR/VOL knob to the Off position. Simultaneously press and hold both the SCAN and WX/BAND keys. While continuing to hold the SCAN and WX/BAND keys, power the radio back On, then continue to hold the SCAN and WX/BAND keys down for 3 seconds, then release both keys. 16 MAINTENANCE To keep your Humminbird® VHF55S working properly, perform the following maintenance as needed. If your unit comes into contact with salt spray, simply wipe the affected surfaces with a cloth dampened in fresh water. [. . . ] Public Correspondence (Marine Operator). Public Correspondence (Marine Operator). Pacific Coast: Coast Guard, East Coast: Commercial Fishing. Boater Calling Channel, Commercial and Noncommercial (Recreational). [. . . ]