User manual HUMMINBIRD WIDE PORTRAIT

[. . . ] INSTALLATION PREPARATION PARTS SUPPLIED PARTS SUPPLIED Before installing your new Humminbird fishsinder, please ensure the following parts are included in the box: · · · · · Fishfinder Transducer with 20' (6m) of cable and mounting hardware kit Mounting system and mounting hardware kit 6' (2m) power cable Publications kit It any of these items is missing, call our Customer Support Hotline. ACCESSORIES Humminbird offers a wide assortment of accessories that complement and expand the capability of your new fishfinder. These accessories are designed with the same high standards and are backed by the same one-year warranty. The Humminbird Accessory catalog included with your unit contains descriptions of the many accessories available and ordering information. [. . . ] When any button is pressed, an audible "chirp" confirms the control input. In the event that a particular button has no function or is inappropriate for the situation, an audible "error", or multiple chirps will be heard. POWER, powers the Wide Portrait up for normal operation. When the unit is on, POWER turns the unit off. POWER can also be used to go directly into the Simulator mode. With the unit powered off, press and hold POWER for several seconds until a continuous chirp is heard. LIGHT controls the unit's 4-position display back light. With the unit powered on, pressing LIGHT once will turn the back light on "low". Pressing LIGHT a second time will turn the back light on "high". Press LIGHT again to turn the back light off. The backlight is very effective for low- light and nighttime operation. When the backlight is on, the Wide Portrait will consume more power than with the backlight off. This is important when using the Wide Portrait in a portable configuration powered by a separate battery, or when powering the unit from a trolling motor battery. NOTE: When powering the unit from a battery such as in portable applications, avoiding use of the backlight prolongs battery life. The VIEW button selects one of several screen configurations or "views" possible depending on the transducer in use. When using the standard (Tri-beam) transducer, the view button toggles the display between the full- screen 2D view, and "Monster Digits" view. Monster Digits increases the size of key digital information so that it can be viewed from a great distance. Pressing VIEW again will toggle the display back to the 2D view. If a Wide Side transducer is being used (see Using Alternative Transducers), the VIEW button is used to select one of four views available: Both, Left, Right, and Down. The three lower buttons, MENU, UP, ARROW, and DOWN ARROW work together to control the Wide Portrait menu-controlled user functions. MENU brings a menu on-screen for adjustment. In normal operation, pressing MENU repeatedly will cycle through all available menu headings. A men remains on-screen for several seconds allowing user adjustment by means of the ARROW keys. If no adjustment is made in the allotted time, the menu disappears. [. . . ] The Wide Portrait also has the ability to work with two additional transducers: Dual Beam and Wide Side. See Available Accessories for selection of the transducer. Wide Side Operation The Wide Side transducer is a specialized "side-locking" transducer which is extremely useful for bank fishing or looking for bait fish in open water. The Wide Side transducer uses 3 different sonar elements which transmit signals to the left, right, and straight down from your boat. The downward beam is 200 kHz with a 24-degree area of coverage. [. . . ]