User manual HUNTER 30200

[. . . ] If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat or override this safety feature. ALWAYS UNPLUG the Air Purifier when it is not in operation, while the filter is being changed, and while it is being cleaned. [. . . ] On/Speed Control: Rotate this knob to turn the unit `on'. The knob rotates through "Off ", "Low", "Medium" and "High". Keep rotating the knob to change speeds until you reach the speed you desire. When the power is "on", the red light will be illuminated. Ionizer: Press this button to turn `on' the ionizer. When the ionizer is `on', the green light near the button will be illuminated. AIR PURIFIER PARTS FILTER RECESS FOR FINGERS TO PULL OPEN FRONT GRILL FRONT GRILL HEPAtechTM 200 FIGURE 1A FORM 41365-01 3 ©2004 HUNTER FAN CO. 41365-01_Rev 6-17-04. pmd 3 6/17/04, 11:58 AM FILTER RECESS FOR FINGERS TO PULL OPEN FRONT GRILL FRONT GRILL HEPAtechTM 250 and HEPAtechTM 255 FIGURE 1B RECESS FOR FINGERS TO PULL OPEN FRONT GRILL HEPAtechTM 374, HEPAtechTM 375 and HEPAtechTM 380 FIGURE 1C FRONT GRILL Using Your Air Purifier 1. Remove your air purifier from the box and take it out of the clear plastic protective bag. Place your HEPAtechTM Air Purification System on a firm, flat surface. Before turning the Air Purifier `on', you need to open the front grill. To release the front grill, place your fingers behind the tabs and pull forward. The filter will be installed in the correct position. Remove the plastic wrapping and replace the filter in the unit. The white filter material should be facing outward (towards you) and the black carbon material should be hidden from view (inside the unit). Be sure that the bottom tabs are in location first, and then push the top of the grill forward until it is closed. The unit is now ready for normal operation. NOTE: This unit will not operate unless the door is placed in the correct position. Plug the unit into a 120V electrical outlet. FORM 41365-01 4 ©2004 HUNTER FAN CO. 41365-01_Rev 6-17-04. pmd 4 6/17/04, 11:58 AM Cleaning And Filter Replacement (Models 30380, 30374, 30375, 37255, 30250 and 30200 use Replacement Filter 30930. ) 1. Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and cleaned in soapy water. When you remove the front grill to clean it, you should also remove the pre-filter from the front grill and gently wash it in soapy water. Washing the pre-filter can help extend the life of your HEPAtechTM Filter. Be sure that all parts are completely dry before you reassemble them to the Air Purifier. [. . . ] For the name of our nearest authorized Hunter Fan Company Service Centre, write to the Hunter Fan Company at the preceding address. You will be responsible for insurance and freight or other transportation to our factory service center. We will return the Air Purifier freight prepaid. The Air Purifier should be properly packaged to avoid damage in transit since we will not be responsible for any such damage. [. . . ]