User manual HUNTER 30240

[. . . ] If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat or override this safety feature. ALWAYS UNPLUG the Air Purifier when it is not in operation, while the filter is being changed, and while it is being cleaned. DO NOT tilt or move the Air Purifier while it is in operation. [. . . ] Be sure that the bottom tabs are in location first, and then push the top of the grill forward until it is closed. The unit is now ready for normal operation. Note: This unit will not operate unless the door is placed in the correct position. Plug the unit into a 120V electrical outlet. 5. 6. © 2005 Hunter Fan Company 41900-01 08/10/2005 41900-01. pmd 3 8/10/05, 9:25 AM 4 HEPAtechTM Filter 0 1 2 3 Pre-Filt er QuietF Filter lo Filte Reset r Pre-filter Front Grill Tabs for opening the front grill Figure 1 - Model 30240 41900-01 08/10/2005 © 2005 Hunter Fan Company 41900-01. pmd 4 8/10/05, 9:25 AM 5 Operating Your Air Purifier Ionizer: Press this button to turn `on' the ionizer. When the ionizer is `on', the green light near the button will be illuminated. On/Speed Control: Rotate the Speed Control knob to set the desired speed. A setting of zero (0) indicates that the unit is off, one (1) is low speed, two (2) is medium speed, and three (3) is high speed. The fan speed can be adjusted at any time. Filter Change Calendar: The filter counter is designed to optimize the performance of the air purifer by reminding you when to change the HEPAtech Filter and pre-filter. HEPAtech Filter Calendar: The HEPAtech Filter indicator is located at the top of the calendar ring. To set the HEPAtech Filter counter, rotate the calendar ring to align the month that you installed the filter with the top indicator. Since the filter is designed for 6 months use, the two indicators will serve as reminders to change the filter every 6 months. Figure 3 - Calendar Knob Pre-filter Calendar: The inner knob of the filter counter is the pre-filter counter. To use, align the knob with the month that you installed the pre-filter. The replace symbol on the inner knob points to the month in which you should install a new pre-filter. The pre-filter is designed for three months of usage. Cleaning And Filter Replacement 1. Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and cleaned in soapy water. At least every 90 days, open the front grill, remove the carbon pre-filter, and replace it. This is necessary to maintain proper odor-removing and overall filtration performance. If necessary, it can be changed more often. Mark the new filter installation sticker included with the new carbon pre-filter. Be sure to remove any plastic wrapping that may be on the new filter before you place it into the Air Purifier. [. . . ] This warranty excludes and does not cover defects, malfunctions or failures of the Air Purifier which were caused by repairs by persons not authorized by us, use of parts or accessories not authorized by us, mishandling, modifications, or damage to the Air Purifier while in your possession, or unreasonable use, including failure to provide reasonable and necessary maintenance. This warranty does not cover Air Purifiers used in commercial applications. There are no express or implied warranties as to commercial purchasers or users. © 2005 Hunter Fan Company 41900-01 08/10/2005 41900-01. pmd 7 8/10/05, 9:25 AM 8 To obtain service, contact the nearest Hunter authorized service center or the Hunter Fan Company Service Department, 2500 Frisco Avenue, Memphis, Tennessee 38114, 901-248-2222. For the name of our nearest authorized Hunter Fan Company Service Center, write to the Hunter Fan Company at the preceding address. [. . . ]