User manual HUSKY LINERS 47000

[. . . ] Hummer H2 Spare Tire Cover Installation Instructions Thank you for the purchase of your new Hummer H2 spare tire cover. Please inspect your package contents before beginning installation. [. . . ] Hold the retaining ring over spare tire with trim facing towards you (latch assembly will be facing down). Place one side of the open end of the ring over the tire and gradually move ring over and around tire until the retaining ring fits over spare tire. Carefully slip the painted faceplate between the tire and stainless retaining ring. Start at the top tire and work down each side, working retaining ring over faceplate edge. Carefully close opening at bottom of the retaining ring, keeping the faceplate centered. Adjust the latch so the retaining ring fits snug. If faceplate is loose, push on retaining ring edge to adjust the retaining ring inward to sandwich faceplate between tire and retaining ring. If the retaining ring overlaps at the bottom, you can cut off excess steel using steel shears. Cut excess material from the open end of ring that has the ladder type product to achieve proper fit. Do not cut off excess from the keyed latch side. Once installation is complete, remove blue colored vinyl coating to reveal luster finish. Wax retaining ring after removing protective vinyl to provide a protective barrier and to help maintain a lustered appearance. [. . . ] Treat it as you would the rest of the painted surface your vehicle. Lubricate the keyed locking mechanism one to two times a year to insure and maintain good mechanical operation. · · · 4700 Unpainted Tire C#11716. doc 02/28/03 [. . . ]