Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HUSKY LINERS 47060. We hope that this HUSKY LINERS 47060 user guide will be useful to you.
Lastmanuals help download the user guide HUSKY LINERS 47060.
Detailed instructions for use are in the User's Guide.
[. . . ] 02/28/03
H2 Hummer Roof Rack Assembly/Mounting Instructions (6 Foot)
Tools Required for Installation: 5/32" Allen Wrench 1/2" End Wrench or Socket X 2 9/16" End Wrench or Socket Package Contents: Roof Rack Halves (2) Rack Bracket T-Nuts (12) Oval Bar--66 _" long (3) w/attached Roof Brackets (6) Oval Bar End Caps (6) Oval Bar T-Nuts (18) Safety Clips (6) _" X 20 X _" Flat Socket Screw (6) 5/16" X 18 X 1_ " Stainless Hex Bolt (7) 3/8" X 16 X _" Stainless Hex Bolt (18) 3/8" X 16 X 1" Stainless Hex Bolt (12) 5/16" X 18 Stainless Nylock Nut (7) 3/8" Stainless Flat Washers (30)
1) Before beginning assembly/installation, please check to make sure you have received all of the contents as listed above. [. . . ] 4) Adjust the position of the six (6) factory attached Rack Brackets so that they are positioned approximately 5/8" from each end of the Oval Bars. Remove existing Hummer H2 top bars (refer to Hummer Owners Manual for removal instructions). 5) Place the assembled roof rack on vehicle located on the existing roof channels. 6) Place a Rack Bracket T-Nut (12) into the slot of the existing roof channel adjacent to each end of the Rack Brackets. The chamfered side of the T-Nut must be facing down (see photo below). Slide these T-Nuts under the Rack Brackets until they are aligned with the Rack Bracket holes. 7) Install one Safety Clip per Bracket (six total) by hooking the clip under the inboard edge of the existing roof channels and pivoting it over the Rack Bracket foot to align with the bolt hole (see photo below). Attach using 3/8" X 16 X 1" stainless hex bolts (12) and 3/8" stainless washers (12). [. . . ] NOTE POSITIONING UNDER EXISTING ROOF CHANNEL
INSTALL T-NUTS IN ROOF CHANNEL WITH CHAMFER SIDE DOWN 47060 H2 Roof Rack Mo#116F9. doc [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSKY LINERS 47060
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSKY LINERS 47060 will begin.
