Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HUSKY LINERS 47911. We hope that this HUSKY LINERS 47911 user guide will be useful to you.
Lastmanuals help download the user guide HUSKY LINERS 47911.
Detailed instructions for use are in the User's Guide.
[. . . ] Check to insure you have received all the above listed Contents and that no damage has occurred during shipping. Package 9/16" Socket and Ratchet Phillips Head Screwdriver
3) Position Storage Box top side down, placing it on a flat, non-marring surface. Remove shipping blocks and Channel Iron from bottom of drawer using Phillips Head Screwdriver. [. . . ] Align handle with holes (shank will pass through opening in drawer) and re-install the 10-32 flathead bolts/nuts using 1/8" Allen Wrench. On the inside of the drawer, re-install the spacer, cam latch and 3/8"-24 lock nut on handle shank, tighten nut only finger tight. Turn handle and note the position of the cam latch. The cam latch should be oriented on handle shank so that it will secure drawer unit when handle is horizontal on drawer (see note #2). Remove 3rd row seat from vehicle and fold second row seats forward. 9) Remove Access Panel from rear or Storage Box using 1/8" Allen Wrench and carefully slide drawer case into cargo area. 10) Insert one (1) of the 3/8" X 3_" Hex Bolts through each end of the two (2) pieces of channel iron (4 bolts total). Screw a Nut Plate onto each of the 4 bolts a few turns (see note #3). 11) Position one of the Channel Iron pieces over the front set of 3rd seat mounting rods. Position the remaining Channel Iron piece over the rear set of 3rd seat mounting rods. 12) Insert the remaining 3/8" X 3_" Hex Bolts through the remaining 4 holes, threading them into Nut Plates. The Nut Plates should be positioned so that they will be pulled against 3rd seat mounting rod when bolts are tightened. 13) Position Storage Box so it is centered side-to-side and also so that it is far enough towards the second seat that the hatch door can close without hitting the handle of the box. 14) Position the four (4) 4" pieces of strap so that one piece is centered under each end of the two pieces of Channel Iron (see note 4). 15) Place one of the 2" X 2_" Plates under the center of each piece of Channel Iron. 16) Evenly tighten all bolts; do not over tighten. [. . . ] If using a cleaner, 409® or Glass Plus® work well. The use or Armor All®, Son-of-a-Gun® or similar items is discouraged as the products make the liner slick. 22) Your Husky Storage Box comes with a limited one-year warranty. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSKY LINERS 47911
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSKY LINERS 47911 will begin.
