User manual HUSKY LINERS 6368

[. . . ] THANK YOU FOR SELECTING A HUSKY FLOOR LINER FROM WINFIELD CONSUMER PRODUCTS CARE AND USE INSTRUCTIONS Your new floor liner is custom molded to fit your particular vehicle. [. . . ] If using a cleaner, 409® or Glass Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick. INSTALLATION INSTRUCTIONS FOR YOUR FORD F-150 SUPER CREW TRUCK SECOND SEAT FLOOR LINER AREA 1 LEFT OR DRIVER'S SIDE RIGHT OR PASSENGER'S SIDE AREA 2 ON VEHICLES EQUIPPED WITHOUT A FACTORY CENTER CONSOLE, IT WILL BE NECESSARY TO TRIM AWAY A PORTION OF THE LINER. TRIM BY REMOVING THE RECESSED AREA OF THE LINER ALONG THE FRONT EDGE AS SHOWN ABOVE (SEE AREA 1). A UTILITY KNIFE OR SCISSORS WORK WELL FOR TRIMMING. USE OFFSET "STEP" AS TRIMMING GUIDE. ON VEHICLES EQUIPPED WITH A FACTORY SUBWOOFER (UNDER DRIVER'S SIDE REAR SEAT), TRIM LINER AS SHOWN ABOVE (AREA 2). USE THE RAISED GROOVE AS A TRIM GUIDE, TRIMMING ALONG THE BACK EDGE (LEAVING RAISED AREA). CONTINUE TRIM OVER HUMP FOLLOWING OFFSET STEP IN PART AS A GUIDE. [. . . ] YOU WILL NEED TO REMOVE TWO OF THE ATTACHMENT BOLTS AND LOOSEN THE THIRD WHICH WILL ALLOW THE SUBWOOFER BOX TO BE RAISED ENOUGH TO SLIDE YOUR LINER UNDERNEATH IT. 6368 Front_Back. doc 01/22/2004 [. . . ]